A442F Transmission upgrades

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 21, 2005
Threads
963
Messages
9,414
Location
Powell River, BC
I think it's time I started saving my nickles for tranmission upgrades/rebuilt.
I've had my 81 for a few years now with no tranny issues, but much like some spouses, it has gotten heavier, the wheels are wider, and a few performance upgrades since the relationship began.
I've now had the warning light come on a few times in recent trips, usually a long haul up a hill where I had to manually drop it down out of drive to keep some decent speed up.
With fuel rod modifications. more boost, larger tires, more weight, I've had the dreaded torque converter shudder happen a lot also.
One issue I also had while on the Rubicon a couple years ago was while trying to crawl up a ledge, truck was in low ranger, 1st gear, lockers on, and I could not bump it over the ledge. The idle would stay at something like 1500 rpm (going on memory here) no matter how far my foot was pushed through the floor, black smoke would be pouring out the exhaust, but it wouldn't hook up. I finally had to bump it over much faster than I preferred.

So, what are our options?

Extremve valave body from Rodney?

Heavy Duty torque converter again from Rodney?

I tend to drive my 81 more like it had a V8 gas engine when on the street, and usually it responds just fine to it...usually.


edit: I do have an aftermarker oil cooler. can't recall what size or specs.
 
Last edited:
I think it's time I started saving my nickles for tranmission upgrades/rebuilt.
I've had my 81 for a few years now with no tranny issues, but much like some spouses, it has gotten heavier, the wheels are wider, and a few performance upgrades since the relationship began.
I've now had the warning light come on a few times in recent trips, usually a long haul up a hill where I had to manually drop it down out of drive to keep some decent speed up.
With fuel rod modifications. more boost, larger tires, more weight, I've had the dreaded torque converter shudder happen a lot also.
One issue I also had while on the Rubicon a couple years ago was while trying to crawl up a ledge, truck was in low ranger, 1st gear, lockers on, and I could not bump it over the ledge. The idle would stay at something like 1500 rpm (going on memory here) no matter how far my foot was pushed through the floor, black smoke would be pouring out the exhaust, but it wouldn't hook up. I finally had to bump it over much faster than I preferred.

So, what are our options?

Extremve valave body from Rodney?

Heavy Duty torque converter again from Rodney?

I tend to drive my 81 more like it had a V8 gas engine when on the street, and usually it responds just fine to it...usually.


edit: I do have an aftermarker oil cooler. can't recall what size or specs.

I'm in the same boat. Maybe we could organize a group buy directly from Rodney for VB's & TC's.

Do you have an ATT gauge?
 
I'm in the same boat. Maybe we could organize a group buy directly from Rodney for VB's & TC's.

Do you have an ATT gauge?

I do now. Normal city driving with average ambient temps (20 deg C or so) the transmission hovers around 150 degrees or so and peak closer to 200 at times.
On a 4x4 trip late last summer all loaded up with the family and towing my M101 with RTT I'd hit (going on memory here) 275 on hills. It;s the long slow gradual ones that really catch you off guard.

Hi, Kevin here.
Did you ever "Upgrade" your tranny? I have to do the same to mine.
Is there anyone here in Canada that provides HD Valve Body, or must we order from U.S.?

I'm not aware of anything "local" for valve bodies, but I've heard various people getting torque converters built.


edit: On some transmission maintenance last year, it was discovered I had a blocked return line which of course did not help cooling at all.
 
You have my interest.
John at Radd Cruisers bought Outback Imports (the previous dealer) and can get anything Wholesale Automatics stocks. Shipping being the biggest downside. So if we all call/message John, he may just take pity on us and see about bulk shipping. I would be in for 2 as a friend needs a TC pronto.
 
I had no idea John bought out Outback. There was a company out of the Yukon that was selling the Wholesale stuff, I don't know if they had originally bought out Outback or were renamed.

Found it! Pacesetter Products


Pacesetter Products - Pacesetter Products


I was quoted back in 2014 $1900 for a billet torque converter plus $300 shipping (no core req'd for the TC)

$1290 plus shipping and GST for the "Extreme" valve body.

They didnt keep stock and lead time was 4-8 weeks.

Free shipping of I ordered it all together.
 
Back
Top Bottom