A440 behind a 4bt?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Who did yours and what is behind your 4bt?

I bought mine from Proffits. It was actually an employee's rig there- search for it, I posted about it last month about the swap John and I did.

I really like it. (Keep in mind that I have owned an OEM Land Cruiser diesel). If you have not ridden in one, I STRONGLY suggest you do so, as it's not for everyone and you may not like it. That said, IF you choose to move forward, I suggest going with a proven design. It's TOO much money to experiment with.

Are you doing this or are you having someone do it for you?

In Austin, we have a pretty decent share of diesel cruisers/soon to be diesel cruisers. Two of which are 4BT- the Princess and mine, La Ballena.

La Ballena is a recon 4BTA (95K miles) with a 700R4 and a 60 tcase. It's my DD. I'm running 35's. You should be able to double your MPG with a similar setup as mine.

Some pics of La Ballena are here

Holler with q's.
Cheers,
Jason
 
Let me clarify my primary intentions for wanting to do the swap because many people have different ideas on what they want to accomplish with their build.

I am at a point that I need to decide to keep the 80 as a wknd trip rig and buy a car of some sort, OR

spend the money i would throw at a car into the 80.

Im not a throttle jockey ON THE TRAIL, so dont see the need to put axles under it YET. I want to go in this direction in order to get close to the fuel mileage out of the 80 that I would in a car. NOT because I want to be able to do trails harder than I can now. I LOVE WHEELING, but thats is whay too much $$$ to spend for a better trail rig. I don't feel safe driving something that I can't see over the car in front of me.:princess:

LANDCRUISER- Its not a hobby, its a lifestyle:idea:
 
PS you dont need the soccer mom AWD anyway, its 2 OR 4WD ONLY!

Naw playa,

You should know in Colorado it goes from sunny and 75* to a foot of snow on the ground before I could even get out and lock in my hubs:grinpimp:
 
Last edited:
No i haven't searched, but just curious why no one really talks about putting a 6bt in an 80? Is it that much bigger and heavier, or is it just not that much more powerful?

And i'm with nay and Christo on keeping the 80 case and tranny. Just upgrade the valve body on it.
 
Let me clarify my primary intentions for wanting to do the swap because many people have different ideas on what they want to accomplish with their build.

I am at a point that I need to decide to keep the 80 as a wknd trip rig and buy a car of some sort, OR

spend the money i would throw at a car into the 80.

Im not a throttle jockey ON THE TRAIL, so dont see the need to put axles under it YET. I want to go in this direction in order to get close to the fuel mileage out of the 80 that I would in a car. NOT because I want to be able to do trails harder than I can now. I LOVE WHEELING, but thats is whay too much $$$ to spend for a better trail rig. I don't feel safe driving something that I can't see over the car in front of me.:princess:

LANDCRUISER- Its not a hobby, its a lifestyle:idea:

Probably not what you want to hear, but by the time you spend the money on a diesel to get better fuel economy, ends up being false economy. I own a diesel and really like it, but the cost of converting one is huge. Don't kid yourself.;)

Buy the cheap car for you DD and build the 80 for your weekend trips.

I have gotten 4 years and counting out of my wife's car that averages 32 mpg and have gotten as much as 36 mpg. We paid 3K for it. It was clean and runs great. Pretty hard to beat that.

Now if you want to do the conversion, just because then drive on. Keep us informed.

Also, Nay was talking about a 60 front and yes it is a huge strength improvement over the front axle. A D70 rear is also much stronger, pinion, ring gear, axles, etc.

Big tires (40's) cost big money to keep it going. Either build it to wheel or build it to repair. Trail repair sucks, garage repairs are much better.

Jack
 
No i haven't searched, but just curious why no one really talks about putting a 6bt in an 80? Is it that much bigger and heavier, or is it just not that much more powerful?

Almost too much of a motor for the 80 depending on who you talk to. Also finding room for it could be a problem even with a 6"+ lift.

The 4bt is essentially the same motor minus 2 cylinders.

Good stuff to consider fellas. Keep 'em coming
 
Yes, if you are doing if for economics, investing 12K or more has a long ROI. Now, if you believe in, 'Land Cruiser, it's not a hobby, but a lifestyle', you'll love it.

And, buying one already done is MUCH cheaper than doing a conversion, unless you are doing it yourself. This means that you have the time, money, resources, skill sets, tools, location, etc, to perform this undertaking, as well as another vehicle. I am sure you have seen Proffits xls on costs on their site. Vehicle not included in that figure. But, they do a great job! If you are gonna keep your rig and want a DD, do it. Otherwise, get an econonbox- I am about to sell one of my Jetta TDIs since I now have La Ballena- and make the 80 a weekend ride.
 
Last edited:
I am doing a 6.2 diesel conversion on my 94 FZJ80 and am using a 700R4 trans mounted to the Toyota transfer case via an adapter from Marks. It uses the stock mounts and has a plate to move the transfer case shifter to the correct place (although mine is off by a few inches) The only thing you have to modify with the 700R4 is the auto shifter. I found an adjustable linkage from Lokar (sold at most every speed shop) and it is going to work really well. The only thing I had to do was to move the shift lever arm to the drivers side with a little creative cutting and welding, not really too hard. I considered using the A440 (or 442 in the FZJ?) but the gearing was a little higher than the 700R4, and by the time I got the toyota trans rebuilt it would have been more than a rebuilt 700R4 and the adapter kit from Marks (supply and demand) The 700R4 is also non-electronic so it eliminated alot of the wiring hassle. As far as the price of the conversion, I consider it my "new" car and by the time I am finished most of the mechanicals will be new and I will have about 1/3 the cost of a new car in it. Plus I am planning on running WVO to further lower my costs.
Good luck with whatever route you take, you will enjoy it!
 
someone on here did put a 6bt in an 80. I think it would call for an upgraded driveline with the torque it puts out. The older 12 valves weren't as powerful from the factory I believe. They are heavy though. If anyone has ridden in a newer Cummins 5.9, I think they would agree, it's one sweet engine. Much quieter than the old variants. I work with a guy doing masonry sometimes who drives an 06 dually and has all kinds of work done to it. Can you say burnouts with a 12,000 pound trailer on the back... Or throw you back in your seat acceleration... One strong engine
 
Hey if you are looking at keeping the a440 then look on the Isuzu 4bd1 thread in the diesel section. They have the name of that company in australia that can provide new beefier valve body and torque converter plus lock-ups and stuff for the a440. The guy from the company even said that it could be rebuilt to withstand a diesel and have better shift points. However, that was talking about the isuzu which I think has less torque. Good luck. Diesel is awesome....then you can run bio and pay almost nothing for fuel.
 
The valvebody is just reprogrammed (valved really) for the diesel.

I read about someone putting in a GM 6.2. I heard a response to that on another board.

Is'nt that like replacing your heart with an aquarium pump?

GMs 6.2/6.5 series were crap which is why they went with isuzu to do the duramax.

FWIW If swaping I would stick with the mercedes diesels and swap in a yota manual trans. I am not swapping I think I can tune what a got to get a bit better MPG and later buy a used diesel SUV.

If money were no object it would get a sequential biturbo BMW I6 or a VW V10 diesel (toureg) or the Audi V12.
 
As noted earlier, you have to spend huge money to convert to a diesel. Then there is the cost issue of diesel vs. gas. Diesel is, around my parts, some $.30 more a gallon.

It would take many, many, many miles of driving to even coming close to breaking even on the investment and higher diesel fuel bill. From an economics perspective, I just don't see the payoff? :flipoff2:
 
I read about someone putting in a GM 6.2. I heard a response to that on another board.

Is'nt that like replacing your heart with an aquarium pump?

GMs 6.2/6.5 series were crap which is why they went with isuzu to do the duramax.

FWIW If swaping I would stick with the mercedes diesels and swap in a yota manual trans. I am not swapping I think I can tune what a got to get a bit better MPG and later buy a used diesel SUV.

I am the one swapping in a GM 6.2 diesel into my 94 FZJ80. I was originally considering the Isuzu diesel but never could find a donor engine. Just by chance I was looking through the local classifieds and found a guy selling military take-out 6.2's. The price was less than the Isuzu I was considering plus it would not need to be rebuilt and I wouldn't need the bellhousing adapter. (more money) I was still hesitant because the only thing I had heard about these engines was from uninformed people who really didn't know what they were talking about. I have done alot of research on this engine in several forums from hundreds of people running these engines with great success. They were designed and built by Detroit Diesel and were designed as a light duty diesel for economy, they were very good for their designated use delivering up to 25 mpg in 1/2 ton trucks with power comparable to the de-tuned gas V-8's of their day and will go 300,000 miles easily. The only drawback may be the IP which apparently lasts somewhere around 100,000 miles. They are about $300 and not too hard to replace so I am not too concerned about that. You may be thinking of the early 5.7 diesel which was not a very good attempt, that is why Detroit Diesel was brought in to build a good engine. GM switched to Isuzu when the diesel power wars started several years ago in order to keep up with Dodge and Ford.
It is not my first choice but probably the best choice when you take into account price, availability of the engines, parts and service. I would love to swap in a 1HDT, or still even an Isuzu but when all is said and done I think I will be very happy with the GM. Plus there is something about the feel of the V-8 you don't get with the smaller turbo's.
 
I assume when Nay speaks of Dana 60, he would mean that it is fitted with 35 spline internals.

Yea, I should have clarified. All the upgraded stuff plus the low gears, which I believe can be had together. My thought here is you should research axles now, whether you buy them or not up front, so you understand the options in the context of your other decisions.

The front is out the door already...the rear I can't see under that kind of torque with 40's, especially if you do a replacement transmission with a very low first gear and a t-case swap with reduced low range and/or crawler.

Basically, two custom 1 ton axles sit somewhere in your plans...how soon they occur is proportionately related to your levels of denial :grinpimp:
 
Sorry, but I'm a little ignorant on the issue of matching up the 440 with a 4bt. Where's the adaptor plate and flexplate coming from? I know you can get an adaptor plate and flex for a 4bt to 700R4.
 
Still a bad match to the quality of the rest of the truck.

Kind of like the throttle response of the newer small diesels with comound turbos. Power to weight is awesome.

If I had to pick a diesel from a us fs truck on a budget it would either be a ford 7.3 or a 12v cummins 6bt.
 
As I said, the 6.2 is not my first choice, the half cut mentioned above was my first choice but at the time I couldn't find one. The Isuzu was my second choice and the 6.2 my 3rd. The 6.2 just sort of fell into my lap at the right time so I decided to try it. $6,500 is a good price, I won't have that much in my swap but will probably be around $5,000 when all is said and done including the WVO conversion. The 6.2 is comparable to the 1FZE in terms of power to weight so I think I will be fine with it, if not I can add a turbo for about $1,000.
Rusty
 
Back
Top Bottom