A/C System Refresh

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 30, 2008
Threads
38
Messages
91
Location
Central NJ
Did an A/C system refresh including all major components, dryer of course, and one of the lines fused to the dryer. Lots of great threads made it straightforward, pulled vacuum and charged it up with freon and I had the coldest A/C ever on this truck. Unfortunately lost freon after a few days so added dye and tried again. Seems I need the "compressor muffler" plate on top of the compressor as it is very corroded and also new reed valves. I come up with P/N 8837160280; can anyone confirm? Not sure if there are more compressor options than the Denso for this truck. Also, does this part come with reed valves? They are listed as NLA so hoping that they are included or are a standard size; I bought an assortment off amazon. Any help would be greatly appreciated.
 
Sounds like you are saying you have a known leak from the compressor 'manifold' and also have leaks at the Schrader Valves?

Locating ALL leaks will should be the first order of things to do.
 
Manifold and reed valves leak, can’t locate any others. Just need to confirm P/N.

"Reed Valves" are located inside the compressor and control the flow (direction and amount) of the refrigerant. 'Schrader Valves' are inside your service ports (typically on the manifold but can ports can be elsewhere).

Your best bet would be to purchase a used manifold (Toyota sometimes calls a muffler, who knows why) from a Denso (10PA17C) compressor (scrap yard).

IF your vehicle is 94-97 year model the number you looked up is correct, but they are expensive (new) and unnecessary. A used manifold with a new gasket and Schrader Valves will work fine.
 
flint, thanks for correcting me, they are indeed Schrader valves, not reed valves; I'm an engineer so I should know better. I did buy a new manifold, it was only $150 from McGeorge. It does include new Schrader valves so after all I spent on redoing the A/C system it is a good investment.
 
flint, thanks for correcting me, they are indeed Schrader valves, not reed valves; I'm an engineer so I should know better. I did buy a new manifold, it was only $150 from McGeorge. It does include new Schrader valves so after all I spent on redoing the A/C system it is a good investment.

Excellent. I was afraid it might be difficult locating the correct one, but seems you managed. Hope your system will now give you long, reliable service.

Thanks for the follow up.
 
Back
Top Bottom