A/C acting weird

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 17, 2015
Threads
65
Messages
445
Location
Jefferson City TN
Hey Guys,

94 Cruiser, ALL Cooling components are new. Just did head gasket last fall and replaced all hoses, radiator, WP, T-stat, bypassed rear heat etc...

Running into a weird AC issue. Occasionally the A/C will cut out as if the motor has hit the 226* mark but it does it randomly and often not in the hottest portions of the day/ when the engine is working hard. Also if I turn the AC off then wait about 10-15 seconds and turn it back on it blows cold. It only does it every few days and I can't find a consistent way of replicating it.

I plan on upgrading my fan clutch from a toyota blue to a Landtank modified blue soon, I also have an electric fan already installed for cooling on the trail.

I am thinking it is 1 of 2 things.

1. My non Toyota T-stat is sticking closed and heating up the motor... I know, I know. Use Toyota. but I got the one that defaults to being open when malfunction occurs as to not cause overheating.

2. Something with the AC system itself is messed up. When the AC does work it blows extremely cold so the system functions, it just cuts out.

Any help would be appreciated as we have a beach trip coming up and I want AC badly for it.

Tommy
 
Does the site glass in the a/c system have air bubbles?

I need to educate myself on the AC better I guess. Where would the site bubble be and what would it mean if it had air
 
I'd guess either there's an electrical issue that's shutting the compressor off or the expansion block is sticking. When it quits cooling, is the compressor still engaged-the front hub is turning?
It appears to be still turning/ engaged. I can feel it kick in when i switch it off then back on, almost instantly cold. that is why I think it isn't a motor temp issue.
 
Mines a 93 and I believe 94 are the same. Site glass is right in front of the battery.
Air bubbles would mean the system is low on Freon.
 
I didn't see an air bubble, but I have a ton of wiring ran in front of it. I cleaned off the glass and it looked clear. Couldn't even tell if I had freon in there. I just charged the system in May... It worked fine until July and now just randomly cuts out...
 
If it blows cold most of the time, I doubt that the refrigerant level is the problem. If you have access to a set of gauges, watch the low side pressure when it blows warm and if it goes to zero or into vacuum, the expansion block is bad.
 
If it blows cold most of the time, I doubt that the refrigerant level is the problem. If you have access to a set of gauges, watch the low side pressure when it blows warm and if it goes to zero or into vacuum, the expansion block is bad.

Problem is it only does the blows warm at random times while driving. It actually blows cool/ cold while sitting. Not as cold as when driving but enough to see the compressor is working. It is weird, it just randomly cuts and their doesn't seem to be any consistency also most of the time a quick switch of the AC button and it will begin to blow cold again. Not every time, but most
 
I'd take it to a shop and have the actual amount of R134 in the system checked. It could be slightly over filled causing the high pressure switch to be tripped when all the underhood parts get hot.
 
Back
Top Bottom