96 engine with 93 intake...?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
61
Messages
384
Location
Sandpoint, ID
I'm looking at a 93 80 Series. The current owner swapped in the engine from a 96 LX450 but didn't change the harness. Because of the differences in wiring and other stuff, he re-used the 93 intake.

The question is... is there anything inherently wrong with this or is it nothing much to worry about?

Thanks.
 
Rick,

I don't know why leaving the 93's intake in would help anything wiring wise - there are zero connections to the intake and AFAIK the intake manifolds are 100% identical. I'm thinking he left it in there because that way he didn't have to pull the wiring harness through the intake of one engine, then feed it back through the newer engine.

However, I'm wondering if there aren't some differences from the OBD system, and the newer 343 tranny. I don't know this firsthand, but aren't there some wiring harness differences that WOULD need to be accounted for putting a newer engine with an older 442 tranny which has near zero electronics?

I guess I'm wondering what those differences are and how did the PO handle it? I wouldn't want to start having check engine lights coming on a year from now and find a bunch of cut wires tied into a lump.

Do all the dash lights properly come on when you start the engine or turn it to "run"? They should pretty much all come on, run their diagnostics then turn back off in a few seconds - from the ABS to the temp lights. I've heard of people unable to fix mating issues simply cutting the dash wires so the lights dont even come on for startup.


DougM
 
I'll have to look a little closer at the dash lights and such, but as far as I can tell everything that is supposed to work does.

I don't think he changed trannies. I might be mistaken, but from what I could tell it really was a engine block swap. Apparently whoever had the engine cut the wiring harness right off the block (dumbass!) so this guy left the existing harness in place an, as far a I can tell, hooked everything up. The original OBD and such were left in place and terminated on the new engine.

He did point out a few differences that he had to work through, but I don't remember what they are. I do remember he said there were several "other connections" (many vacuum) on the 96 intake so he left the 93 on there.

The best I can tell he did everything right. It just seemed a little hokey to me, which is why I asked.
 
Mebbee it's just me but I think there are enough good used 80s around (esp Seattle area near you) that I wouldn't buy one that's been really altered or messed with unless the price was ridiculously low. Its value if you decide to sell is diminished as well because you'd have to 'splain to someone else that it's got a used block in it. If it's otherwise spectacular and the history checks out free of flood/crash damage then maybe.

There's just a lot that can go wrong. A nice bang on the crankshaft with the tranny while mating these two heavy components, the donor engine was laying in the junkyard for two years and starts burning oil in a year, stripped a couple sensors while assembling, etc, etc X1000.

DougM
 
Rick,

I don't know why leaving the 93's intake in would help anything wiring wise - there are zero connections to the intake and AFAIK the intake manifolds are 100% identical. I'm thinking he left it in there because that way he didn't have to pull the wiring harness through the intake of one engine, then feed it back through the newer engine.

'96's intake has the temperature sensor at a different location. Some '93 does not need such sensor.
 
Hmm, I have had them both off and don't recall differences. Mine's a CA model 93 with the PAIR valve on the exhaust mans. So maybe the CA models were different/same as more recent OBDs? Who knows? I'd go look but I'm having too much fun playing with a handgun laser I just mounted. You should see what it does when you fire it at a diamond!!

DougM
 
Doug,

I agree that I 'should' be able to find something in Seattle... I've passed on a few that were close, but not close enough. Basically it comes down to the fact that I'm a cheap bastard and am looking for a 'killer' deal.

This particular 93 is far from a done deal. Heck it isn't officially for sale yet! The current owner is a contractor I work with who has something along the lines of a small fleet of vehicles at home (12+). He just bought another pickup and his wife has pretty much threatened his life... one of the rigs needs to go. So the Cruiser is likely headed on the block.

I'm interested for a couple of reasons - the block has about 50K on it and the tranny has recently been rebuilt. With the exception of the front axle needing the usual leaky knuckle service, mechanically it seems to be in much better shape than most 93's. The interior is far better than any 93 I've seen, and the rear windows/roof rack aren't leaking. And it has diff lockers.

But it might very well be in my cheap ass price range for a couple of reasons - the current owner isn't a Toyota guy (rebuilds 18 wheelers for a hobby) and isn't nearly as proud of it as someone on this board would likely be. The paint job is completely f'd - it's BAD!!! It is the dark silver/grey and the entire hood, front fenders, and roof are completely peeled off. As is he won't get sqwat for it on the open market, and he knows it. The other option is repaint, and well, he doesn't want to invest the money.

So if I can get it for my price range (don't ask, really its low!) then I pretty much don't give a damn about resale. The plan is use it as a DD for a couple of years then start wheeling the hell out of it.

Oh, and the intake... (wasn't that what this thread was about???) The 93 has a couple of vacuum lines on it that apparently the 96 didn't have. I don't know what the hell they are, but that was the main reason for keeping that intake.
 
Hmm, I have had them both off and don't recall differences. Mine's a CA model 93 with the PAIR valve on the exhaust mans. So maybe the CA models were different/same as more recent OBDs? Who knows? I'd go look but I'm having too much fun playing with a handgun laser I just mounted. You should see what it does when you fire it at a diamond!!

DougM

First pic: CA model 1993 intake

Second pic: 1996 intake

intake_93.jpg



intake_96.jpg
 
Back
Top Bottom