- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,200
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
No trick.
The factory press fits the brass valve guide into the aluminum casting. To remove, pull it out.
I clamp it in the vise, grab plunger groove w/ dikes, and then lever against something.
The factory press fits the brass valve guide into the aluminum casting. To remove, pull it out.
I clamp it in the vise, grab plunger groove w/ dikes, and then lever against something.