80 front diffs: all the same?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 26, 2009
Threads
6
Messages
35
Location
manila, philippines
I am looking to get a powertrax or aussie locker for my open FRONT diff on my asian spec hdj80 next month when I'm back stateside. It has a 10 bolt cover. (see my signature line for model year, etc). I believe my unit is same as later model oz "standard" (non-fulltime) 80s.

Anyone know if the aussie locker or powertrax units sold in the US for your fj and fzj80s front diffs will fit mine?

Thanks in advance for any info on front diff types.

-miguel
 
Miguel,

Do you have pics of your front diff? I would like to see the ten bolts cover you are talking about. Also, have you look at Drexx cruisers to see if they are the same since he lives in PI now?
 
If you dont have the factory lockers all the 80 diff are the same from petrol to diesel the difference is from front to back, the front is smaller than the back. i had a lokka lock right from 4wd systems and it work bloody well and i love it, when i orded it they told me that it would if no matter wot. Well in australia they are i think it would be the same over there but you never know it is toyota we are talking about haha
 
The "10 bolt cover" description is what the local arb agent told me after looking at it when I asked for a quote for a front airlocker.
 
I counted the bolts on the front pumpkin; there are indeed 10 of them. Not all 10 are visible in the photo I took, but there are 10 of them. :meh:

So can anybody answer my question re (open) front diff differences and fitting a US market aussie or powertrax?
front diff 80.webp
 
Pare ko,

I just looked at my truck and the pumpkin look the same on your pic. Now as far as putting on aussie locker or powertrax, I don't see why you can't install one but wouldn't you think it is kinda dangerous to drive an aussie equipped front diff? I would rather install a selectable locker up front like an ARB or an OEM for safety reasons, you know what I mean:D
 
4x4CPOSEADOG said:
...but wouldn't you think it is kinda dangerous to drive an aussie equipped front diff? I would rather install a selectable locker up front like an ARB or an OEM for safety reasons, you know what I mean:D
His sig line says
part-time 4wd w/ manual hubs
 
Pls don't make this about selectable vs auto lockers. Fwiw, WHEN my truck's in 4wd, 95 percent of the time it is low range trail use. There is also a slight(!!!) difference in the price of an aussie vs an arb. Plus I don't want to mess with the pinion pre-load.

Anybody know if the US market front diffs are same as asia and australia?


EDIT: I think I found the answer on JT justdifferentials.com website:

8" Reverse cut (fj80 front)
8" REVERSE CUT. Found in front of Landcruiser FJ80, FZJ80, HZJ80, HDJ80, UZJ100, FZJ100, FZJ105, HZJ105, HZJ78, HZJ79, FZJ78, FZJ79, LJ70, RJ70, LANDCRUISER II, Bundera. Also commonly used in swaps to 8" solid axle hilux, or 79-85 Pickup (requires high pinion housing)

I think they are all same 10 bolt units if they all use the same gear sets, so I reckon I'm getting a new lunchbox :-)
 
Last edited:
Back
Top Bottom