All right guys I need some help chasing down an electrical issue, I think. I have an after market alarm with remote start and keyless entry. The alarm has been installed for approximately 1.5 years. About a week ago a strange thing started happening with my door locks. If I unarmed the cruiser get in and start the car the actuators for the door locks would fire without me touching any other buttons. At first I thought I might have changed something on the alarm, i.e. having the doors lock when the 80 is placed in drive, but all of the doors were still unlocked. Then the next time the actuators fired was when I was driving around with the driver side window down, I went to roll down the passenger side and hit the driver side switch and the actuators fired for the door locks, but they remained unlocked. Know this has been going on for last two weeks and it’s starting to drive me nuts as I can hear firing the actuators for no reason. The strange thing is that now, sometimes when I arm the alarm it arms but doesn’t lock the doors
I spoke to the alarm installer and he said he can look at it, but said that the alarm sends a positive and negative pulse to lock and unlock the doors, so he doesn’t think it is the alarm as it is doing it when I am driving. Any help would be greatly appreciated.
I spoke to the alarm installer and he said he can look at it, but said that the alarm sends a positive and negative pulse to lock and unlock the doors, so he doesn’t think it is the alarm as it is doing it when I am driving. Any help would be greatly appreciated.