Trade 72' fj40 for your 80 (Baby on the way...)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

To start I am absolutely against this, I barely got the wife's approval to take our two kids in my 40, but with another baby on the way the 40 wont get the attention it deserves. I need a nice 80 with under 200k on the clock. Obviously lockers, ARB bumpers, 3rd row seats, and a nice lift/tires would be optimal but not mandatory.

I picked up this 40 last year and did a pretty solid refresh, build thread is in the sig. its a 9/71 with a 73 F.5 3 speed tranny and 3 speed TC. crane cams XR700 ignition, brand new trollhole carb, and new stock exhaust all the way back. I put this drive train in about six months ago and it has run great from day one, it does have a slight seep from the rear main as well as a seep from the parking brake. I just picked up a rebuilt F.5 SM420 3s TC combo and planned to swap them out prior to getting the good news about the baby. If you want it, it comes with it, and if the 80 offered is nice enough I'll do the swap for you. current setup cruises at 55-60 all day long and I drive it to school three days a week 20 miles each way with out issue.

Body has its share of filler, wheel wells were cut pretty well, its definitely a five footer and not a trailer queen, flat khaki paint job makes for easy touch ups. floors look good with no holes or rot, I planned to reskin the rear quarters and wheel wells some where in the way distant future but just had too much damn fun driving to take it down that long.

has five brand new stock steel rims and five brand new 33x10.5x15 BFM MT KM2 tires with 200 miles on them. paki top and bows are from Ehsan and in good shape. new steel gas tank and dash pad covers as well as new front fenders.

I just put a front bench in from a 70' that is grey and could use a new cover as the PO burnt a quarter sized hole in the passenger seat. I still have the aftermarket buckets as well if you would rather have those. they just sat too high for my 6' frame. Metaltech cage is the full family style with frame tie ins front and rear as well as hip guards that haven't been installed yet. has long jump seats that are in great shape.

under carriage was done by the PO, looks to be POR-15'd frame and axles, he said they were all rebuilt but i've learned not to believe a word he said. they dont leak and the drums all work great. all new brake lines as well as MC, new clutch MC as well. brand new 4" Rough Country lift with stock length anti-inversion shackles

http://i80.photobucket.com/albums/j161/nickswan/0d7bef21.jpg

It serves beach duty every weekend without complaint

http://i80.photobucket.com/albums/j161/nickswan/40a7837f.jpg

I planned to reupholster the stock seats, mexican blanket for now...

http://i80.photobucket.com/albums/j161/nickswan/85a5740b.jpg

http://i80.photobucket.com/albums/j161/nickswan/4a5364f0.jpg

Storage boxes to retain jump seats with the cage. holds everything you need.

http://i80.photobucket.com/albums/j161/nickswan/a152f1c7.jpg

still undecided if i want to do a line-x type coating for the floor or sand and paint it. in patina currently.

http://i80.photobucket.com/albums/j161/nickswan/310180bb.jpg

Here are the buckets if you want em as well as hubcaps.

http://i80.photobucket.com/albums/j161/nickswan/fbdc2c9b.jpg

all new emblems, mirrors, and lights all round add up fast...

http://i80.photobucket.com/albums/j161/nickswan/98df7077.jpg

i guess the PO couldn't decide what style mirror he wanted so he drilled a bunch of holes in the driver side door... need to fill those. this shot shows 1" shackles that were too high for my taste and removed.

2738144c.jpg


http://i80.photobucket.com/albums/j161/nickswan/428ebf9b.jpg

For the most part un-molested dash except for the tach

http://i80.photobucket.com/albums/j161/nickswan/89d6f349.jpg

It seems like I was in the home stretch of this refresh when my wife said two kids + baby = 80 not 40

I would hate to add up what I have into this but I would say north of $15k. Let's start at $11,999 with all the spares and the extra rebuilt drivetrain.
 
Last edited:
Yep, this should be interesting. What should we put the over/under at ? $10k ?

Always thought that one just had a GREAT look to it. Wish I had seen it for sale before it hit feebay. I'll put a bid in, probably won't win it.
 
I think nickswan sold it for around $10k. I was seriously thinking about buying it. Solid rig
 
Interesting, it's in Zionsville and so am I and I've not seen it or even heard about it. And zionsville isn't very big. I emailed the seller through eBay to see if I can look it over this weekend.
 
Last edited:
Couldn't resist. It's mine. Thought it would go near 10k, got it for $8099 - fair enough. Very exited. Getting the trailer out for a little road trip to Indianna.
 
All goes well, I'll be picking up a 99' LX470 next weekend, so I guess I need to retitle this FOR SALE.

Another epic Saturday at the beach

f14f8a00.jpg


I took the blanket off to sport the stock seats

05f36422.jpg


I found a vinyl paint for seats to match the back seats, so they will get sprayed this week. Pretty cool stuff

d3d5d2d8.jpg


f20bfffe.jpg


9043c7d5.jpg
Gotta say I really like the look of this one . I know u sold it but can u give me some feedback on the rough country lift ? Trying to decide which to get for mine
Thanks
 

Users who are viewing this thread

Back
Top Bottom