69 dizzy okay for pertronix?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 20, 2005
Threads
74
Messages
673
Location
nw montana
77FJ55 side project running like crap, had a delco remy dizzy with no vacuum hookup, ??mechanical advance??

2 cylinders with no fire.

ordered pertronix kit and coil from Kurt

put it in toyota small cap dizzy I had. It idled perfect but coughs and spits during acceleration. then realized its a retarded dizzy.... not my day.

Kurt doesn't have a vac advance in stock.:confused:

I have a early 69 fj55 dizzy in a 1F that I'm not using, runs well.
It has a vacuum diaphragm and a metal tube that goes to the carb. I am guessing it's an advance.

Question:
Could I put the pertronix in this 69 dizzy and maybe cut the metal line and use a rubber vac hose to the proper port?

thanks for any help
 
Even without pics to confirm it, this one's easy. The only dizzies that had the metal line to the carb were the early vac advance ones. So the answer is yes.

THe only potential issue is how old your pertronix kit is. Some of the older ones were not notched to clear the post on the breaker plate where the advancer connects. Test fit the unit and if the pertronix plate hits the post, just file the plate a little to make sure the breaker plate has the full range of motion.

Best

Mark A.
 
thank you mark, you are a great help once again.
 
Back
Top Bottom