68 rear locker options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 28, 2005
Threads
26
Messages
72
Location
Tempe, AZ
Please assist me here, I need to be schooled by all u pros out there as to my options for a rear locker for my 68-40. All opinions please. If $$ was no object and this is multi use street/trail rig that my kids often steal from me for crusin to the high school football games and events (way cooler, they tell me, than moms POS Colbalt). Iv'e done some searching and red the FAQs, but not much discussed about this special year of 40. Apperciate and and all offers of wisdom!:beer:
 
I've got a slightly used 10-spline lockright I'll be able to sell in a couple weeks. :D


Otherwise, you can upgrade to newer axleshafts and use any 30-spline locker. ARB, lockright, aussie, etc.
 
CruisinGA said:
What more do you need to know?

X2.

If you want to keep your original 10 spline axle shafts and lock it up, you have 2 choices: weld the spider gears, or a lockright. The lockrights are still available, but they run about $260 last time I looked and don't come up for sale used very often. That's why I mentioned that I will be getting rid of mine soon.

If you swap in newer 30-spline shafts (69+), you can use any locker for 69-97 Land Cruiser differentials - Aussie, Lockright, Powertrax No-slip, ARB, Detroit, etc. At that point, which one you buy depends on how much you're willing to spend. An Aussie is only $220 or so. An ARB will run closer $800 by the time you're done.

Eric
 
Mine is a 68 also. Everyone says that they are all coarse spline but that is not entirely true. Most locker companies list 69and up to cover themselves. 68 is when they began to switch to fine spline axles, soooo you need to pull the rear diff cover and see for your self which type you have. Mine is fine spline. Also if your kids are anything like I was in high school be prepared for broken parts with a locker or at least let them know it will handle differently, basically teach them how to drive it. Good luck Tom
 
I have a set of 40 shafts for sale if you are intrested PM Me.. you could pick up an Aussie (30 spline) for about $230 and get my shafts (pretty cheep) let me know

Trevor
 
If you want the best of both worlds, spend the $$$ and put ARBs in. You get the open differential around town and full locking capabilities offroad. ARBs are strong as hell, and will be the last component in your axle to break!
 
I have two 30 spline axels sitting here so let me know if you wanna buy one.. The axel you have is sorta worthless so I would weld the spiders and start looking for a 69+ axel for when it breaks.. You should be able to get one for $75 or maybe even free.. I just sold the Aussie for $220 shipped so the axel upgrade and locker can be done for $200 - $300...
 
like CruiserTom mentioned, pull your cover and count your splines. My 68 is fine spline. I've got an Aussie in the rear and love it. When I bought mine I couldn't find a deal and had to pay full price- the total cost with shipping was still only $270.
 
Back
Top Bottom