- Location
- United States
i'm listing this for a friend who's not on mud.........
1968 fj40 project rig. still needs a lot of work but here are the stats:
1989 chevy suburban 350 TBI engine
stock gm harness clenaed up and re-loomed with stock computer
engine runs well and starts right up
blockhugger headers
cast iron gm bell housing
new flywheel
new clutch assy
sm 420 transmission with plate adapter
rebuilt t-case; later case with 3spd gears ( i rebuilt this on the bench )
nose cone saver and t-case saver installed
custom rear x-member for t-case
new AA twin stick kit
stock drive shafts
SOA mocked up and mostly done with SR ( all ruffstuff soa part included )
fj60 rear axle ( also comes with stock 68 fj40 rear axle )
stock axle in front
complete set of minitruck knuckles for disc brake swap
knuckle rebuild kit nib
saginaw ps box installed and hooked up to later 76 fj40 column
brand new aluminum rad
painless chassis wiring harness
aftermarket gauges
metaltech cage
hard top
tub has some rust, needs a new rear sill
toyota booster and master
and a bunch of other stu8ff i forgot.
basically, this is a rig for somebody looking for a project at a reasonable price. sure, it still needs some parts and a lot of work but there's a LOT here to start with. comes with some roll-around tires and rims but nothing fancy or trail/street worthy.
i'll attach some pics and i have more. if you have any questions, feel free to call or email the owner, nick:
naughtynick209@yahoo.com
209-817-1623
located in northern CA. runs but does not drive, will need to be trailered!
1968 fj40 project rig. still needs a lot of work but here are the stats:
1989 chevy suburban 350 TBI engine
stock gm harness clenaed up and re-loomed with stock computer
engine runs well and starts right up
blockhugger headers
cast iron gm bell housing
new flywheel
new clutch assy
sm 420 transmission with plate adapter
rebuilt t-case; later case with 3spd gears ( i rebuilt this on the bench )
nose cone saver and t-case saver installed
custom rear x-member for t-case
new AA twin stick kit
stock drive shafts
SOA mocked up and mostly done with SR ( all ruffstuff soa part included )
fj60 rear axle ( also comes with stock 68 fj40 rear axle )
stock axle in front
complete set of minitruck knuckles for disc brake swap
knuckle rebuild kit nib
saginaw ps box installed and hooked up to later 76 fj40 column
brand new aluminum rad
painless chassis wiring harness
aftermarket gauges
metaltech cage
hard top
tub has some rust, needs a new rear sill
toyota booster and master
and a bunch of other stu8ff i forgot.
basically, this is a rig for somebody looking for a project at a reasonable price. sure, it still needs some parts and a lot of work but there's a LOT here to start with. comes with some roll-around tires and rims but nothing fancy or trail/street worthy.
i'll attach some pics and i have more. if you have any questions, feel free to call or email the owner, nick:
naughtynick209@yahoo.com
209-817-1623
located in northern CA. runs but does not drive, will need to be trailered!
