40th anniversary badging

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2005
Threads
24
Messages
126
Location
Oregon
A friend of mine just bought a 40th that has one of the "40th anniversary" decals tore up on one side. I've looked around for replacements and have had no luck. Does anyone know a place to get these? Or are they just not existant anymore?
 
Land Bruiser said:
A friend of mine just bought a 40th that has one of the "40th anniversary" decals tore up on one side. I've looked around for replacements and have had no luck. Does anyone know a place to get these? Or are they just not existant anymore?

They are all gone. I am working on replacements but its too early to tell if it can happen. Don't count on me.
 
I had contacted FirstToy about this just before the holidays and when we get our acts together I will post up about a group order/buy for those that are interested. Maybe FirstToy will chime in but he had told me previously that the "th Anniversary" flat decal section would be very easy and affordable but the raised "40" part would be the one that would be harder and much more expensive to produce.
 
To clarify a bit.

There were actually 2 versions of the emblem, black for the sage vehicles and silver for the green ones. The factory emblems are discontinued. We have batted around the idea of trying to "fake" :hillbilly some.

D-
 
clownmidget said:
I had contacted FirstToy about this just before the holidays and when we get our acts together I will post up about a group order/buy for those that are interested. Maybe FirstToy will chime in but he had told me previously that the "th Anniversary" flat decal section would be very easy and affordable but the raised "40" part would be the one that would be harder and much more expensive to produce.

Using the removed 40 and the decal from my wrecked fender, I have had them both scanned and rendered as graphic files. I am working on quotes now, but they will be pricey because the 40 will require that a mold be made.
 
clownmidget said:
Thanks Jim - I'm interested (obviously) in them so please keep us updated.

I am pessimistic because, like the way of the replacement leather seats, people often express a lot of interest in quoting a job, then drop off the face of the earth or go on about their more pressing matters and ignore you. If it can happen I'll let you know.
 
The 40 is the hard part. It's not that it is difficult but this type of thing requires a minimum volume, usually around 500. And there usually is a "setup fee" as well.
I dont think there are 250 people willing to front $ for this type of thing.

One off's would be very expensive unless someone has a relationship w/ a vendor that does this type of thing.

The "th Anniversary" is no problem

Mike,
If you have photos of it, email it to me and I'll look into it as well. (keep it down to a couple megs or so)
 
elmariachi said:
I am pessimistic

that makes two of us ;) I want to replace these but I don't want to spend $200 doing it either :rolleyes: PM me once you have an idea on how much "start-up" capital we're talking so I can try and submit my fair share.
 
Kaderabek said:
You just need to find someone with a fake 40th and ply them with beer. :D

TJK

Well see, that brings up another point. Here I am, thinking of replicating the badge set for the benefit of those of us who have wrecked or damaged 40th trucks. Were I to have them produced, I would never want to sell them to someone to put on a non-40th truck. Yet I, in a move of arrogance and greed, stuck that set on my/your truck. Such a hypocrite am I.:frown:
 
This might be blasphemy....
I have never seen the badges for the 40th...I'm assuming they're made of metal/plastic.....but what about having it made out of vinyl with an adhesive backing.

We had to duplicate some 69 Firebird Trans Am decals for my brothers car because the ones in the restoration catalogs weren't accurate...and the local paint shops couldn't duplicate them...
(color, size, font)

anyway this would save some money...and you could have several made as back ups....


H
 
elmariachi said:
Same Bat time, same Bat Channel this year. Only I am planning on making twice as much. So you'll need twice as much :beer:. Then I'll remove your badges.:flipoff2:

"Badges....badges....we don't need no stinkin' badges..."


;)
 
hguerrero said:
....but what about having it made out of vinyl with an adhesive backing.


The Toyota 40th decals are mylar, with an adhesive backing. The "40" is raised or blistered or 3D...
 
Last edited:
hguerrero said:
This might be blasphemy....
I have never seen the badges for the 40th...I'm assuming they're made of metal/plastic.....but what about having it made out of vinyl with an adhesive backing. H

It would be easy to do them in vinyl with the graphics files I have. I suppose if the plastic ones cannot be affordably recreated that would be an alternative. Actually, the "40" is made out of Mylar, so sayeth the manufacturer I have bidding them.
 
elmariachi said:
I am pessimistic because, like the way of the replacement leather seats, people often express a lot of interest in quoting a job, then drop off the face of the earth or go on about their more pressing matters and ignore you. If it can happen I'll let you know.

Is that what happened to the leather seat thing? I've been wondering about that.
 
elmariachi said:
I am pessimistic because, like the way of the replacement leather seats, people often express a lot of interest in quoting a job, then drop off the face of the earth or go on about their more pressing matters and ignore you. If it can happen I'll let you know.


Jim,
I would be very interested in some replacements (just in case) and would be happy to put a deposit down to prove my commitment.
 
Back
Top Bottom