4.88 gearing question...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 4, 2007
Threads
8
Messages
43
This quite the noob question so excuse the ignorance.

I want to go to 4.88 gearing to compensate for 33"+ tires. What do I NEED to get to make this work? I have the factory OEM 80 lockers. Do I need to re-gear the front and rear? center? Spacers? Seals?

Thanks for the info. VERY much appreciated.
 
Regearing is replacing the ring and pinion gears in the front and rear axle's differentials. It's about a thousand to fifteen-hundred buck job to have a good shop do the install, that includes parts. Cruiser Outfitters can hook you up with everything needed to do the install, and depending on your location could do/help find someone to do the install for you. ~$700 for the parts, then $200-$800 for labor depending on how much you can do yourself and how expensive the shop is.

If (no offense but I am assuming you're not the one to do it) you can pull the 3rd members, or get a cruiser/wrenching savvy friend to do it, you'll save hundreds of dollars.
 
What's the difference with reverse cut gears?
 
What's the difference with reverse cut gears?

The front 8" in the 80's is similar to the 8" in the hilux's etc which use them in the rear as well. Even though they do not utilise the hi-mount the ring ears are the same. The Reverse cut is simply to allow it to be used in the front as was stated.
Can I make an observation...
IMO if your simply running 33's I wouldnt be wasting money on re-gearing your diffs. An FZJ80 has plenty of grunt to spin 33's all day long with the std 4.1's. I personally loved the extra cruising speed and I had 35's. Only since moving to 37's full time have I done my diff's. I did fit 105 series extractors right away which does wonders for the torque of the petrol.
If all you want is to correct the speedo error then there are easier solutions using replacment speedo gears or electronic modules that bolt on and alloy you multiple wheel selections.
 
This is good information. I had some very basic questions and this is exactly the 411 i needed. I was looking to upgrade to 4.88 because I feel it will be more responsive/quicker around town plus more grunt off road climbing. I prob don't NEED them but I would like to eventually have them (6mo or so)
 
Hrm, with 33's and 4.88's you'd be revving out to 3500rpm in overdrive (manual) to make 80mph.
 
Oddly 80 MPH is the published maximum crusing speed for the 80 Series.
 
????

Not quite, where did you learn math?


Hrm, with 33's and 4.88's you'd be revving out to 3500rpm in overdrive (manual) to make 80mph.
 
:)so thats what it means?
40 series 40 mph
60 series 60 mph
80 series 80 mph
100 series 100 mph

Kinda close to true!



80 is too fast in an 80.
 
You mean in terms of getting a ticket, or exploding the Cruiser?

Keep in mind, I drove a 94 from 1994 to 2006 without any problems, and now have a 97, also without any problems.

I was really kidding, I am just jealous b/c I don't remember what it was like to be able to drive 80+, or even 70+ to be honest.
 
Back
Top Bottom