4.5 Liter internals??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 12, 2006
Threads
85
Messages
1,110
Location
Chicago!
Hey all...does anyone know if there is much difference in the internals of pre 1995 FZJ 4.5 motors? I'm thinking of picking up a '94 and doing a rebuild, stud the head, etc and dropping it in my '97 LX 450 at a later date and was wondering if anyone knows what the differences might be other than those air injection valve dealies on the '94-'93s.

Thanks,

Jason
 
No internal differences that would impact what you're doing. The PAIR valves are on the ex manifold and you'd merely swap manifolds during the switch for instance. However, I think you could buy a 95+ engine for the same price to build up so why not do that? Would save a bit of hassle here and there like wiring connectors that may have changed and of course they use different trannies.

DougM
 
Yeah I guess ideal would be a 95+ motor. But the stuff is hard to find on the cheap and I just found one on the cheap. Called my friend who works at a Toyota dealer and he too confirmed that the head and short block are the same. Short block shows the same part number from 93-97. The head had a different number for pre '95 but then they both become the same number.

Also, towards the why not just get a '95+, this motor is relatively close to Chicago so I can run to get it...double bonus!
 
In order to use a 93-94 motor in a 95-97 truck you will need to change the crankshaft timing gear and use the upper oil pan off of the 95-97 motor. The 95-97 oil pan has the crankshaft position sensor mounted in it.
 
Thanks Dan...you're the man.
 
Back
Top Bottom