3rd row wheel well covers - need test vehicle

[jackbflyin]

I installed Scott Kerr/Specialist 3D Products- Specialist 3D Products - https://s3dp.com.au/ , 3D printed covers after removal of 3rd row seats. Invoice describes contact as kerree12@bigpond.com, Australia 0408 021 983 but I emailed with him at info@s3dp.com.au and paid $160 AUD+24 AUD shipping (184 AUD or 144 USD). He said custom made to order out of engineering grade PETG polymer with your requested colour. The covers look great. It took just under a month to receive in Pennsylvania after ordering. Those covers along with the HE cargo mat really cleans up the cargo area.

 

[Madtiger]

I installed Scott Kerr/Specialist 3D Products- Specialist 3D Products - https://s3dp.com.au/ , 3D printed covers after removal of 3rd row seats. Invoice describes contact as kerree12@bigpond.com, Australia 0408 021 983 but I emailed with him at info@s3dp.com.au and paid $160 AUD+24 AUD shipping (184 AUD or 144 USD). He said custom made to order out of engineering grade PETG polymer with your requested colour. The covers look great. It took just under a month to receive in Pennsylvania after ordering. Those covers along with the HE cargo mat really cleans up the cargo area.

View attachment 2731865

View attachment 2731866

View attachment 2731867

Fantastic news!!! Thank you!

 

[Tex68w]

Not bad, not bad at all.

 

[AnyMal]

There is an opportunity here with the body bolt mounts to fashion a cargo sun shade roller a la two row spec.
Something very appealing for me as I like to hide my gear, and have PTSD from living in San Francisco.

 

[DCOVIEL]

Fantastic news!!! Thank you!

BOOM. Finally. a solid solution. I emailed the info line...!

 

[AZLC200]

I ordered some and just installed them this weekend. When I emailed him he mentioned that he also has ones with a D-Ring that can be used to tie down cargo, so i went with those. Easy installation and looks good. Now i just need one of the HE cargo mats.

 

[TLC2013]

I ordered some and just installed them this weekend. When I emailed him he mentioned that he also has ones with a D-Ring that can be used to tie down cargo, so i went with those. Easy installation and looks good. Now i just need one of the HE cargo mats.

View attachment 2825655

View attachment 2825656

Looks great, having the D-rings is icing on the cake, is there a part number on the website for these or just shoot them an email down under to order ?

 

[Sandroad]

I just caught up with this thread. I wonder if a group buy would be possible? There’s the potential to sell a lot of the D ring version!

 

[AZLC200]

Looks great, having the D-rings is icing on the cake, is there a part number on the website for these or just shoot them an email down under to order ?

I couldn't find it listed on his website, so I just emailed him. Seems like it is just one guy behind the company (he was on vacation when I originally emailed him, but he addressed it when he got back). He said he makes them to order and can do custom colors (I stuck with black). Had to pay via a paypal account (I don't have one, but my wife does) and then he shipped it airmail from Australia. I think it was an extra $20 for the D-ring version over the cost of the regular version. I paid $198 AUD which was about $145 USD including shipping. He did say that because of the volume of requests he is going to get a website set up where you can order through the website, but don't know if that has happened yet.

 

[TLC2013]

I couldn't find it listed on his website, so I just emailed him. Seems like it is just one guy behind the company (he was on vacation when I originally emailed him, but he addressed it when he got back). He said he makes them to order and can do custom colors (I stuck with black). Had to pay via a paypal account (I don't have one, but my wife does) and then he shipped it airmail from Australia. I think it was an extra $20 for the D-ring version over the cost of the regular version. I paid $198 AUD which was about $145 USD including shipping. He did say that because of the volume of requests he is going to get a website set up where you can order through the website, but don't know if that has happened yet.

Thanks for the info. Email sent. This was a great find.

 

[TheComedian]

So… if I cut out my covers there is maybe a mountingpoint hidden behind?
I'm way past the point of worrying about covers....

btw any idea whats the white plastic thing in the middle is for?

 

[CharlieS]

I thought it was a receiver for the key remote?

 

[timeo]

I ordered some and just installed them this weekend. When I emailed him he mentioned that he also has ones with a D-Ring that can be used to tie down cargo, so i went with those. Easy installation and looks good. Now i just need one of the HE cargo mats.

View attachment 2825655

View attachment 2825656

Just received my set of covers sans bolts, anyone know what size bolts these are? Thx

 

[TheLCProject]

So… if I cut out my covers there is maybe a mountingpoint hidden behind?

No on the mounting point. It appears that the brackets for the third row seat mounts are spot welded to the wheel arch. You should have clean wheel arches behind your plastic side trim.

 

[Sandroad]

Just received my set of covers sans bolts, anyone know what size bolts these are? Thx

The OEM are M10x1.25 and 1” long.

 

[AZLC200]

Just received my set of covers sans bolts, anyone know what size bolts these are? Thx

You just re-use the factory bolts that anchor the third row seat into that spot.

 

[patpend2000]

So… if I cut out my covers there is maybe a mountingpoint hidden behind?
I'm way past the point of worrying about covers....
View attachment 2826546
btw any idea whats the white plastic thing in the middle is for?

off topic - but a quick question about your steering wheel - does it have the fake wood portions? If not can you take some more photos of your steering wheel

 

[TheComedian]

off topic - but a quick question about your steering wheel - does it have the fake wood portions? If not can you take some more photos of your steering wheel

Nah there is nothing that looks like wood hehe

 

[Tex68w]

Oh baby, that manual.

 

[timeo]

For those w/ a tan interior. Here is how mine looks after painting w/ this Rustoleum, not perfect match but close enough for me.