3fe guys 180 or 195

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Factory is generally best unless you are trying to achieve something in particular???
 
I run a 180 in my FJ-62's 3FE. I have a variable speed electric fan set to work with a 180 degree tstat and I stay +- 3 degrees of 190 (aftermarket temp sensor drilled and tapped into the lower tstat housing opposite of the stock sensor).

Prior to moving to the electric fan I got pretty big temp swings (185-208) because the mechanical fan's clutch is set up to work with the 195 degree tstat which wants to keep the temp in the 200-205 area. You can crudely adjust the clutch by altering the fluid or using a spacer. Not sure how effective this would be.
 
Back
Top Bottom