3FE Block, Crank, Rods... 2F Motors, FJ55 Parts

[mountain4x4]

Location

United States

3FE, FREE 2F Motors, FJ55 Parts, Custom Alcan Springs

After some years the stuff is building up too much to tolerate. If anyone needs something feel free to get in touch. I'll ship anything except blocks, which I can drop off at the truck depot of your choice... I'm going to ebay some of this stuff in a while, if I do I'll post a link to the auction.

1988 3FE Block, Crank, and rods. Motor spun a rod bearing, slight damage to the crank journal, crank will have to go AT LEAST .010 under on the rod journals, mains look good, block and rods look good.

LOTS of 2F motors. 6 or 7 blocks, cranks, cams. 1 cylinder head. Cheap.

FJ55 Parts. I was building one, then quit, sold my Vortec 454 and Dana 60s so I could finish my rally car. All parts are pulled. I have a body and frame chopped 1 ft. and re-welded, if some one wants to pick it up, theyre yours for $50. I spent many hours chopping the body in half and welding it back together. It was then sand blasted, and I enlarged the rear wheel wells. It came out pretty good, but its just sitting there taking up lots of my precious parking right now...

PLEASE SEE MY LAST POST FOR DESCRIPTION OF THE SUSPENSION I'M NOW SELLING. EMAIL ME, DO NOT PM ME, TO GET IN TOUCH WITH ME.

2F BLOCKS ARE NOW FREE! I may have to use them for flower planters or something if no one takes them away...

Thanks for looking, hope this stuff is useful to someone.
Dave
DCahoon@nednet.net

 

[tucker74]

So what year is the FJ55 - and do you have the parts pulled from it...or just the body/frame?

Tucker

 

[johnny]

can i get some info on some of those 2fs? is there one that really shines in your eyes

 

[bomber22]

Interested In Some 2f Stuff , Like Emmision Equip. , Complete Moters , Located In Westminster Co.

 

[Dan_J-spec_fj62]

got pix????
if you do please email

danielolsen1@mac.com


thanks

dan

 

[cruiser_guy]

Needing some FJ55 front signal lights (the kind that sit on TOP of the fenders). They are similar to the FJ40 but they have a flat base. I'm desparate and will take the old or new style as lond as they are in decent shape.

 

[chiprg1221]

I was wondering if you still had the 2f head. If so, how is the condition. Price???

 

[mountain4x4]

Still have tons of stuff... FREE 2F BLOCKS... Custom ALCAN Springs

Yes, I do have a 2f head. And lots of other stuff. I'm now GIVING AWAY 2F BLOCKS. Come and get them out of my way, PLEASE.

I also have a fj55 body and frame thats been chopped 12" behind the rear axle. Get 'em both for $50. Body has some bedliner on the interior floorboards, rust repair done on the floor, seat mounts set up for Grand Cherokee power leather seats...

I have a custom spring under suspension, about 5" lift, that needs to go to a good owner. It was for my fj55, but was made for fj60 spring and shackle mounts. It should fit right on a fj60, I have the spring mounts if you want to fit 'em to a fj40 or 55. Front springs were made for a shackles in the rear of the front spring. I have the shackle reversal pieces as well. It was made by Alcan, and cost me about $900. These are some really nice springs. Make me an offer...

Please Email me at DCahoon@nednet.net dif you want to actually get in touch with me. I'm not getting Emailed by IH8MUD if threres a response to this post, or if I get a PM, so PLEASE EMAIL ME!