3D printed console latch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 10, 2011
Threads
38
Messages
1,924
Location
Lawrenceville GA
I seem to remember someone mentioned this in a past thread but cant find it. I have a double lid on my center console and the lower latch is broken and the upper latch hardly works. Anyone have a 3d printed version or either or both, something better
??
 
Junkyard Toyota and pick up some random bolts for fun too.
 
I'm pretty sure the latches are still available from Toyota, and are cheap. Why bother with a repro? Have you called your favorite Toyota parts guy?
 
Double check with your parts expert, but 5 minutes on the Google gave me these numbers:
58976-20020
58908-60010
I don't know if one is early 80 series and one is late, or if one is upper and one is lower, or what the difference is, but both appear to be readily available for just a few bucks.
 
For some reason I remember seeing something about 3d printed ones that were stronger or had a design change. Thanks for the part #'s I'll probably just pick up a few if they are cheap!
 
Back
Top Bottom