3B running hot

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

No I have no means of measuring drive pressure. Also I think I got the turbo type wrong, IIRC it's a TD04 9 something, not a 13T. It's from a subaru impreza.

That's very interesting. However I'm not that comfortable with playing with the timing. It has been running reliable and strong for 4years now as a daily driver so I hope it will hold up for a very long time to come.
I did not hook up the watercooling for the turbo. I read on here that on a diesel it was not strictly needee and it would put more strain on the cooling system.
 
Hmm I thought the impress were the 13t compressor. That turbo you described sounds like a td04-9b which can come in 4,5 and 6 cm housings, and even smaller when fitted to equipment. It's definately too small if that was what you were running.
Strangely I agree turbo water cooling has a negative effect on the overall cooling system. It will lead to longer bearing life, but it's better for the engine overall to idle your temps down than to rely on the turbo water cooling to protect your turbo bearings on a hot shutdown.
g
 
I had to look it up as I was now confused. It's a TD04L 13T-6 . I opted for this one after reading on here how happy people were with the quick boost at low rpm. And as there's hardly any point in revving it hard I like the low and midrange grunt.
 
So I've run that turbo multiple times and it's a nice match for an off the shelf turbo that is easy to source, is very reliable, easy to rebuild, lots of aftermarket parts, maps well and is responsive....hard not to like it. Spec wise it's very near identical to the gt2052 diesel42 uses in his kit. The td04l turbine flows slightly more and the Garrett compressor flows a bit more. Very similar turbine housings. Be quite hard for the average guy to tell the performance apart.
 
I would reccomend this turbo to anyone wanting to turbo their 3B. It sure wakes it up!
 
Back
Top Bottom