38.5's are good...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 2, 2005
Threads
263
Messages
4,508
Location
Albemarle NC
Just test fitted a 38.5x11 Bogger today with my new 14" Pro-comp front shocks. With the bump stops dropped 4" over stock there is absolutely zero rubbing and the shock is being used to its full potential!

At ride height
dscn1784ic5.jpg


Stuffed
dscn1785xl4.jpg

dscn1786an2.jpg
 
What type of liner did you use? I'm thinking of stealing your idea of coating the front.
 
What are the specs on the wheel? That will make a big difference on how it fits.
 
thats great

could you put your one tire on the back and try and stuff it?
the front end doesn't do much on the 80 anyway but the rear will be tricky.

I'm not worried about the rear, I know I'll need about 2" more bumpstop spacers, but with the narrow tire it should fit in the wheelwell very easily, but will have more tests/pictures soon.

Can you do that again with a pic of the underside at the shock? With the 14" travel shock, and 4" drops, how much is left for compression on the shock?

Also what is your measurements of lift and stuff vs. drop? Are you severely biased towards drop?

I'll get more pics when I get all the tires in my possession, all I wanted to know was a generic, "will it fit".

I am at about 4.5" up and 9.5" down, I may go with a set of Japanese 5.5" springs or the OME comp 5" springs to even things out. There is no wasted compression with the 14" shock and adapters, I bottom out about 1cm before the shock does (bumpstop compressed).

What type of liner did you use? I'm thinking of stealing your idea of coating the front.

Reflex liner, there are a few reflex dealers scattered about the country, but it is superior to Rhino, and possibly even Line-X in cost and durability.
 
Back
Top Bottom