2F/NP435/plate adaptor/3 spd. case

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LC_Hamma

The Anti-Leafer
Joined
Nov 11, 2002
Threads
98
Messages
2,656
Location
Dallas, Georgia
I envisioned this for a while thinkin' I could clock up the tcase & have a flatter bellypan. After my booty mockup, I realized the NP435 hangs 1 1/2" lower than the SM420, which isn't ideal. I pretty much know what I need to do to get this all bolted together - details not necessary now. You can guage from the last two pics on how far I was able to clock it w/o the driveshaft hitting the motor mount:
BTW the last pic is under my 55 - SM420/ AA adaptor:
 
Last edited:
It looks like I'll be able to run less fluid, but the real Q is do I think it's worth it knowing the tranny hangs down lower than my SM420's? A few things I've noticed are:
1) Clutch is no prob, cuz I can use a 10 spline GM disc w/F flywheel, but I'm gonna hafta make an extended piece to fit over the end of the tranny input - it doesn't quite reach the crank bushing.
2) Fab up a lower tranny to bellhousing mount. The uppers bolt right up.
3) Make the adaptor plate
4) Cut & respline the rear tranny shaft to accept the LC gear & figure how I want to keep it fixed - add snap ring groove to the shaft or drill & tap the end for a bolt/ washer a la SM420 style.
5) The tranny has only 1 threaded boss to use as tcase linkage mount, so I gotta be creative in mounting the assy.
6) The tranny bearing retainer is an exact fit in the 3 spd. bellhousing.
7) I won't lose much crawlin' ability cuz it's a Ford NP435 - 6.69 to 1 first gear.
 
I've had a 'case get some oil sucked out of it before by the tranny, and it definintely didn't like it. You might be able to get by with overfilling it, but I think I would put a fill plug on the PTO cover.

Just curious, why a 435?
 
Okay, the main reason is "to be different". Yeah right! I thought the last two pictures pretty much explained it. You can't clock up the 420 cuz of the reverse gear bulge w/ the plate adaptor. You could run a phat CV joint up top if needed w/ the 435, plenty of room for it. I don't wanna raise the drivetrain, so I'd have to lower my skidplate cuz the 435 hangs lower than the 420.
 
LC_Hamma said:
Okay, the main reason is "to be different". Yeah right!



I thought you had the market cornered on different, running an 8 lug rear axle and a 6 lug front.... ;)



Why not a 465?


Too bland? :)


Too reliable? :)
 
you are going to fine the same issue that the SM420 and the SM465 have for clocking...there is zero extra space for the bottom bolt on the t-case mount if you clock it too far, since it will literally end up ON the lower bearing on the tranny.

This is why the existing plate adapters for the SM465 and SM420 are only provided with one clocking option. Your only other option will be a long adapter and spud shaft.
 
Why not a 465?

Too big, too heavy, not as low as a 420 or 435, no need for 2 p.t.o. ports., etc...

you are going to fine the same issue that the SM420 and the SM465 have for clocking...there is zero extra space for the bottom bolt on the t-case mount if you clock it too far, since it will literally end up ON the lower bearing on the tranny.

Just get an Atals, and clock at will hamma....

As the pics show, you can clock the 435 way high.
Ahh yeah, this one is slated for my next buildup w/ the Cummins, 60's, auto., links, etc.
 
Last edited:
What is the weight diff between these:


435/465/420



You may be able to clock it that high, but I think you will have drive shaft/rear engine mount issues...


Been there-




SK04-05-33.jpg





Good luck!



-Steve
 
ISSUES, ISSUES, We ain't got no stinkin'........
What's the big deal about fabbin' another mount? Clocking the case IS the MAIN goal here. As long as you can keep the shaft from hitting the bottom of the bellhuosing by adjusting your pass side bumpstop, I think you're good to go.
 
Have pics on a friends camera of the new mount and front shaft, but he has not posted them up yet...


I know, I know.....worthless without pics....
 
Back
Top Bottom