1HD-T engine swap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 11, 2007
Threads
46
Messages
499
Location
Vancouver Island, BC
Hey there,

I am debating about getting North American model 80 and swapping a 1HD-T into it. For those who have done it, what are the hurdles? Do you I need to stick with the earlier model transmission for ease of swap?

Before you ask, I already have a the 1HD-T (imported it from Japan over a year ago).

Thanks.

Brad
 
Make that engine like new even as you begin assembling the parts you will need for the installation. It's a lot easier to work on the bench than under the car.


Kalawang
 
you can use the 1HD-T with an A442F without problem .. if your IP comes with the right braket for the kickdown cable .. and got the proper ECUs ..

Much more easy job with an H150 or H151 tranny ..
 
You need to search, there is a lot of info on this site.

If you are contemplating the install, get everything with the engine including transmission.


Rob

Thanks for all the info guys.

Rob, the HDJ81 is already sitting in my driveway with hopefully all the bits at my fingertips. Guess I should have made that clearer in original post.

Brad
 
Last edited:
Thanks for all the info guys.

Rob, the HDJ81 is already sitting in my driveway with hopefully all the bits at my fingertips. Guess I should have made that clearer in original post.

Brad

Mostly electrical Brad, very simple if you understand vehicle electrics.

Good luck and hope to see you if you ever get over to the island.

Cheers

Rob
 
Back
Top Bottom