1995 OBD1 or OBD2?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2010
Threads
87
Messages
351
Location
Plain City, UT
My son's CEL came on again tonight and is running real rough. He has a 1995 FZJ80. I tried last night to read the codes from the OBD1 outlet on the firewall, passenger side and cannot get a reading. There is another port right in with the fuses in the cab on the drivers side. Does anyone know if this is a OBD1 as well? Or can I use an OBD2 reader on it?

Thanks for your help.
 
Look at the sticker under the hood. I believe it will say OBD II and that will confirm full OBD II complient or not.

From what I've seen, all 1995 Land Cruiser models were fully OBD II complient. Not saying some weren't, but so far, I've not seen any that were not. The 1995 models did still include the OBD I port, because officially, for emissions checking purposes, they would still be OBD I vehicles.
 
Mine is OBD II
 
I got a 95 also, and I know what your taking about. I initially thought mine was OBDI at first when I looked at the Diagnosis outlet on the firewall. There is an OBDII connection inside the cab on the drivers side. It is in the same panel you take off to check the fuses inside the cab. I was able to hookup my OBDII Scanner easily and find out which codes were kicking.

Good luck!
 
95 is OBD2 you need a scantool to retrieve DTCs, most parts stores will use their scanner to tell you what codes you have for free
 
95 is OBDII compliant. If you're around Sac, CA you can borrow my scanner.
 
It prob. doesn't help but IIRC, there are 95's that are OBD"1.5" which means they have partial OBD II compliance and some 95's that are completely OBDII. Depends on month of production I think....someone will know a bit better.

My 95 was not OBDII compliant. It had the port but my scanners would not pull codes or talk.
 
Back
Top Bottom