1995 Cruiser EGR Emission issues?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 7, 2016
Threads
176
Messages
939
Location
Decatur GA
I just cleaned out the EGR on an old Honda that was not passing emissions and it did wonders for the test. Is there any reason I would not want to take mine off my 1995 Land Cruiser and clean out the carbon? Is that ever an issue? I am in the process of replacing the distributor cap, rotor and wires, but I thought I would do that too if it might help.
 
If the truck is not throwing a code, the consensus seems to be to leave the EGR system alone. Hopefully others more knowledgeable will chime in.
 
I noticed that when I was checking it out. I had a feeling someone might mention that tube nut. I looked at it as if I just saw a venomous snake in the engine compartment. I think I am going to leave it alone. No codes and the engine runs great. Just can't pass emissions. Trying the distributor route first based on most opinions.
 
High NOx, CO, HC? What is it that is causing it not to pass? EGR definitely is not worth messing with unless it is broken IMO. Make sure timing is at spec (sorry I forget what it is supposed to be...7°?). Check PCV and change your oil.
 
Failing on HC and CO. You can see my original post about my emissions here

1995 FJ(Z?)80 Catalytic converter

I am currently waiting on new distributor cap, rotor and wires but I keep hearing the PCV so that will be done too. I think it is just time for a good thorough tune up. I am really new to this.
 
Back
Top Bottom