1991 80 Alternator Fit Problems

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2017
Threads
19
Messages
425
Location
Wakulla FLA
So I ordered and picked up an alternator. 80Amp Carquest. Wife took the core and picked it up. First of all the negative wire that is prewired on the alternator seems to be attached to the wrong post. Since I dont have the core Im just trying to remember but I seem to remember it attached to the other post. Can anybody confirm this? And secondly, when I set the alternator down on the bottom mounting post the new alternator seem to short- not tall enough to reach the adjustment bracket. Seems very cut and dry right? Wrong alternator. But if anyone is familiar enough with the 1991 80 alternator looks like, or has a picture of one, OR can tell me Im an idiot for not figuring something out I'd be very very greatful. As a side note, I cant imagine getting that thing out without pulling the smog pump. You would have to be a magician. Or a real mechanic. Thanks MUD!

fj80 alternator.webp


fj80 alternator2.webp
 
When I replaced mine I pulled the smog pump didn't take long that is the correct part number from carquest. Are you sure you didn't have a 90 amp installed previously? Its possible the wrong label went on the alternator I would also ask carquest to bring in a new one to check.
 
When I replaced mine I pulled the smog pump didn't take long that is the correct part number from carquest. Are you sure you didn't have a 90 amp installed previously? Its possible the wrong label went on the alternator I would also ask carquest to bring in a new one to check.

They still have the core so Im going there in a couple hours to compare them. The ole having your wife pick up your part thing kind of backfired. But they did bench test the alternator so I would have thought the technician would have had enough time with them to compare them before they sent her home. If the 90amp is physically bigger/taller than thats where my problem is. I would think they were the same size?
 
They still have the core so Im going there in a couple hours to compare them. The ole having your wife pick up your part thing kind of backfired. But they did bench test the alternator so I would have thought the technician would have had enough time with them to compare them before they sent her home. If the 90amp is physically bigger/taller than thats where my problem is. I would think they were the same size?

I am not sure I thought they were the same size too but just a possibility
 
I am not sure I thought they were the same size too but just a possibility

Well just saw another thread about differences but dont address the huge gap I have between the adjustment slot and the alt top mounting point. Ill take some pics of the core and this one side by side. Maybe there will be some value in it down the road for someone.
 
So I ordered and picked up an alternator. 80Amp Carquest. Wife took the core and picked it up. First of all the negative wire that is prewired on the alternator seems to be attached to the wrong post. Since I dont have the core Im just trying to remember but I seem to remember it attached to the other post. Can anybody confirm this? And secondly, when I set the alternator down on the bottom mounting post the new alternator seem to short- not tall enough to reach the adjustment bracket. Seems very cut and dry right? Wrong alternator. But if anyone is familiar enough with the 1991 80 alternator looks like, or has a picture of one, OR can tell me Im an idiot for not figuring something out I'd be very very greatful. As a side note, I cant imagine getting that thing out without pulling the smog pump. You would have to be a magician. Or a real mechanic. Thanks MUD!

View attachment 1433956

View attachment 1433958

Why not just rebuild your own? Or have a local Alternator/Starter shop do it?
 
90A on left, 80A on right

IMG_20130415_184439_390.webp


80A on left, 90A in right in next 2
IMG_20130415_184430_921.webp


IMG_20130415_184419_977.webp


80A is internally regulated and not rebuildable (well can't buy rebuild parts from dealer), 90A is externally regulated and can be rebuilt. They have different mounts. 90A can be modified to fit, but wiring should be the same. The 90A is a OE unit I put on my 91 a few years ago and the 80A is the original OE I took off.

The one pictured in the OP looks like an 80A unit. As far as the grounding, I see what your talking about, but I can't speak to that specifically.
 
Last edited:
So I ordered and picked up an alternator. 80Amp Carquest.
That was your first mistake ;)

It has been extremely well documented that aftermarket alternators/starters do not last very long. If you stay aftermarket as opposed to an OEM reman unit, you will get very good at swapping.

80 amp units have an external fan, 90 amp units have an internal fan. They use different mounting brackets, so they are not "bolt in" compatible. You have the wrong alternator.
 
Hey guys. Had a family member pass and took the wind out of my wrenching sails but I'm back on it. My problem ended up being user error with the alignment and mounting bracket. So I got it in there and like all things automtove it was a good excercse since I could do it all again in a couple hours max. BUT the 80 amp from carquest had loose pins holding it together so when I installed it the bolt/pin was hitting the fan blade on the alternator. Never would have thought the alternator case would not be fully assembled. And as mentioned above the positive terminal came with a black ring instead of red so beware. It is running fine. Volt meter still ticks when turn signals are engaged for what its worth.
 
Back
Top Bottom