1990-1994 birfs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2004
Threads
261
Messages
2,957
Hi Guys, Does anyone know the length of the birf in a 1990-1994 80 series? From fat end to tip of spline.

I will be using these in a 70 series with a newer front end.

I need 2 in very good condition if anyone has one or a set - no beaters please. I am pretty sure they will be the same as the ones I need.

Regards.
 
Louis,
From my trials and errors.

The input ends and ABS ring seem to be identical on our models. Somewhere between 93/94 the FZJ80 output/drive flanges where changed. Slightly longer output shaft splines and a thicker drive flange, mind you in an emergency they will work together.
The current HZJ79L input shafts same as above, but the output/drive flanges are a larger diameter.

I do have a new 79 greaseable birf , but no spindle.
Perhaps we can trade some parts???

Mike
 
I'd be into trades for sure. I can get away with using the spindles I have here so that is no problem.

I know the shafts are a little longer, I have some spacers made up so i can fit some free wheeling hubs for it - i have the hubs already - fresh in from australia.

You can call or email at 613-614-7852, or PM me your number. I need to get this back together this week - so whatever I do I have to do quickly.

Thanks.
 
Back
Top Bottom