1983 BJ 60 Running gear (1 Viewer)

Joined
Feb 21, 2006
Messages
1,034
Running gear out a 1983 BJ 60 i am parting out (out of an insured and running truck as of Nov 2006), includes, 3B diesel engine (230,231 miles), 4 spd trans c/w shifter, Transfer case c/w shifter, Radiator and hoses, Air Cleaner assembly (BJ60), Under hood wiring harness (complete), Bellhousing has good working OEM tach sensor and harness included.


Available as a complete unit not including PS components ..............SOLD

Power Steering (Components for PS only) alone for 60 conversion.....SOLD

Pickup on the engine would be best, or buyer to arrange shipping, as i have never shipped anything this big and heavy before.

Best Regards

Gord
 
Last edited:
Joined
Oct 24, 2005
Messages
2,410
Location
Cuba, MO
Gord.......Thinking about pricing out a swap from my 60 how much would it cost to ship this puppy to MO, USA

Thanks

lunyou
 
Joined
Feb 21, 2006
Messages
1,034
Gord.......Thinking about pricing out a swap from my 60 how much would it cost to ship this puppy to MO, USA

Thanks

lunyou

i have never shipped anything this big before...a guess would say $1000.00....but pickup would be best...


Gord
 
Joined
Oct 24, 2005
Messages
2,410
Location
Cuba, MO
Yeah i figured the shipping would be terrible but the trip to BC from Missouri would be a beating in itself in a FJ60 with a small trailer.

lunyou
 
Joined
Feb 21, 2006
Messages
1,034
new price for complete unit........see original posting

Best Regards

Gord
 
Last edited:
Joined
Feb 21, 2006
Messages
1,034
I am very interested, but like I mention, a medical bill kinda took away my diesel money stash. :frown:

well you know if you don't have your health, not much else matters

hope thing's are better for you. its only an engine, and there will be more around if this one does not find its way to you.

best regards

Gord
 
Joined
Oct 24, 2005
Messages
2,410
Location
Cuba, MO
Gord do you come across these motors often?? Right after I complete my body work(rust repair and paint) on my chop top I will begin looking for a Toy diesel to drop into my truck. A complete set up like this would be awesome but will take some saving to come up with the money......just wonderin how often you come across these setups.

lunyou
 
Joined
Dec 23, 2003
Messages
3,801
Location
Payson, AZ
lunyou, i prolly dont have to tell ya, but even if it costs 3K to your door, its a steal for a nearly drop in swap.
 
Joined
Feb 21, 2006
Messages
1,034
Gord do you come across these motors often?? Right after I complete my body work(rust repair and paint) on my chop top I will begin looking for a Toy diesel to drop into my truck. A complete set up like this would be awesome but will take some saving to come up with the money......just wonderin how often you come across these setups.

lunyou

not as often as they used to be....i have 2 complete setups right now ( this one and a 5 spd combination also) and i am always looking ...so it's all a matter of timing as i see it

Best regards

Gord
 
Joined
Oct 24, 2005
Messages
2,410
Location
Cuba, MO
lunyou, i prolly dont have to tell ya, but even if it costs 3K to your door, its a steal for a nearly drop in swap.

Hey you can tell me anything you want.....that what this site is all about.

I have been watching this motor tranny combo for a while wishing I could afford it. I can get a great hookup on some WVO and create my own diesel. Gord has a great price on this.

I was hoping either to find a complete setup like this or a 2H with everthing except the tranny since I have the 4 spd that will bolt directly to the 2H......3B takes a different tranny or some work to make it fit.

Bump for a great deal....although for mysake I wish this thread would get hidden for a while until I can afford it. ;)

lunyou
 

jayhawkcruiser

1985 4Runner
Joined
Jan 3, 2006
Messages
301
Location
Midwest
Shipping

If you could post you pickup address, I will try to run a freight quote to the Kansas City, KS area. I need to know a few things.

1) Can you leave it on the roller stand?
2) Can you palletize it? On the roller stand, or without it?
3) Is the pickup location a business or residence?
4) Do you have the ability to load the engine on a semi, or do you need one with a lift gate?
5) It would be best to have some side and top protection for the unit. Can you fabricate something out of wood or preferably steel?
6) Do you have any way of weighing the unit? Weight?_____ pounds
7) I will need dimensions length _____ x width _____ x height ______.

Thanks
Craig
 
Joined
Feb 21, 2006
Messages
1,034
If you could post you pickup address, I will try to run a freight quote to the Kansas City, KS area. I need to know a few things.

1) Can you leave it on the roller stand?
2) Can you palletize it? On the roller stand, or without it?
3) Is the pickup location a business or residence?
4) Do you have the ability to load the engine on a semi, or do you need one with a lift gate?
5) It would be best to have some side and top protection for the unit. Can you fabricate something out of wood or preferably steel?
6) Do you have any way of weighing the unit? Weight?_____ pounds
7) I will need dimensions length _____ x width _____ x height ______.

Thanks
Craig

Hi Craig

I can either leave it on the roller stand or remove the wheels and place it on a pallet, pickup location is my residence and a lift gate would be best or a small trailer as i have an engine hoist, but a semi would be a somewhat difficult unless it were equipped with a hiab crane, i can fabricate side protection out of wood...

have no way of weighing it though ( i would think someone here would know what the weight would be) but i would hazard a guess of 700 lbs

the size of the pallet would be approx 60' L x 24" W x 30" H

best regards

Gord.................. tdilad@gmail.com
 
Last edited:
Joined
Nov 4, 2004
Messages
38
Nice olive drab FJ40

Gord,
I have seen your rig around the 100 hundred mile area recently.Nice truck,i'm located in the 150 Mile area.Did you do the frame up on your Fj40 or can recommend someone in the area?
 

Users who are viewing this thread

Top Bottom