- Location
- United States
http://chico.craigslist.org/cto/3908110612.html
1969 FJ40 Toyota Land Cruiser. Smog exempt, built for wheeling. I bought the fj40 stock and have spent the past 10 years building it. It is nearly complete and drives great. Items left to do are paint, side diamond plates and fenders (have them to include) and the rear axle traction bar (also have this part). I have put very few miles, <2,000, on it since getting it to this point. The truck is street legal, registered thru July 2014. I have almost all of the receipts for items listed below and built with primarily new parts.
1995 Chevy V8 throttle body had about 44k miles on it when I bought it.
SM420
4wheel disc brakes
upgraded knuckles (1981) and heavy duty, new studs
spring over lift
front springs reversed to lengthen wheelbase slightly
added leaf to front spring pack to stiffen it
axle knuckles turned to improve steering
power steering
tilt steering column and grant wheel
22 gallon rear tank, original under seat tank removed
interior is rhino lined and under carriage is coated in por 15
frame was sandblasted and powder coated.
custom rear driveshaft with CV joint - also have a custom made spare
detroit locker in rear and a limited slip locker in front
4.56 gears
aftermarket gauges and bezel
centerforce clutch
howell wiring harness
36x12.5 super swampers on 15" steel rims
full roll cage
seats are from a suburu WRX
tuffy locking center console
full soft top and bikini top
The truck was built by my nephew and friends that all have Toyota FJ40s and are wheeling enthusiasts. Must see and drive.
I could not attach photos here - please click link above to see the add with photos.
408 460-6601
Truck is located in Chico, CA.
1969 FJ40 Toyota Land Cruiser. Smog exempt, built for wheeling. I bought the fj40 stock and have spent the past 10 years building it. It is nearly complete and drives great. Items left to do are paint, side diamond plates and fenders (have them to include) and the rear axle traction bar (also have this part). I have put very few miles, <2,000, on it since getting it to this point. The truck is street legal, registered thru July 2014. I have almost all of the receipts for items listed below and built with primarily new parts.
1995 Chevy V8 throttle body had about 44k miles on it when I bought it.
SM420
4wheel disc brakes
upgraded knuckles (1981) and heavy duty, new studs
spring over lift
front springs reversed to lengthen wheelbase slightly
added leaf to front spring pack to stiffen it
axle knuckles turned to improve steering
power steering
tilt steering column and grant wheel
22 gallon rear tank, original under seat tank removed
interior is rhino lined and under carriage is coated in por 15
frame was sandblasted and powder coated.
custom rear driveshaft with CV joint - also have a custom made spare
detroit locker in rear and a limited slip locker in front
4.56 gears
aftermarket gauges and bezel
centerforce clutch
howell wiring harness
36x12.5 super swampers on 15" steel rims
full roll cage
seats are from a suburu WRX
tuffy locking center console
full soft top and bikini top
The truck was built by my nephew and friends that all have Toyota FJ40s and are wheeling enthusiasts. Must see and drive.
I could not attach photos here - please click link above to see the add with photos.
408 460-6601
Truck is located in Chico, CA.
