shimmy

  1. C

    1999 Land Cruiser minor torsion bar adjustment results in steering shimmy

    I installed OME 2865 coils a few months ago and cranked up my OEM torsion bars less than 1.5 inches and then had had it aligned. The steering became super light and I ended up with a shimmy in the steering wheel around 70mph. The shocks are new OEM, the UCA is original and I have not added a...
  2. caladin

    Bump steer, Torque steer, break steer, generally difficult to point where I want to go.

    I bought a pre lifted fj60, it's on 33s and there seems to be plenty of room, so a 2" or 3" lift. The PO has proven to make some odd decisions, so it may have not been aligned/shimmed after the lift. When on a bump or rutted road, have to work pretty hard to keep it going straight and on the...
  3. trudd

    My Hail Mary - need help diagnosing this shimmy / vibration

    I’ve put off writing this thread for months, because I believed the answer was already out there. But after 100+ hours of research/wrenching/losing sleep, here we are. ’09 LX, 169k miles. Southern car, no rust. Family daily driver, state camping machine, and occasional 4x4 roads in remote NM...
Back
Top Bottom