bump stop

  1. L

    How important is that cone bump stop that sits in the rear springs..?

    Hi all i have a 80 cruiser and the rear cone bump stop on the passenger side is rusted out and the bump stop is sitting on the bottom of the spring. i have some timbren bump stops coming in but those sit on the out side of where that cone bump stop is.. opinions?
    • lc80vinhy
    • Thread
    • 80 series bump stop land cruiser 80 series rear bump stop rust repair
    • Replies: 6
    • Forum: 80-Series Tech
  2. NelsonCruiser

    Loose and ratting front coil bump stop

    Hey everyone I have had slight rattle coming from the front end that I have deduced down to the bump stop that is in the coil. How do I tighten this up? Thanks in advance, -Josh
  3. cstav86

    Bump Stop Clearance

    Issue: I only have about 1/2” clearance between my bump stop and the top of the 4plus U bolt flip kit on the front axle. This seems way too tight. What is normal? Are my bump stops too long? Are these springs flat? They are OME mediums. It sits level with the rear. The springs are 4 years old...
  4. P

    Looking for some parts ?

    Anyone got any bump stops and/or limit straps they want to sell ?
Back
Top Bottom