Parts run: Australia

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Status
Not open for further replies.
Joined
Dec 7, 2004
Threads
48
Messages
489
Location
The Lou
Location
United States
That's right, Australia.

I've rented a portion of a container to ship over some stuff from Australia. I have to buy container space in cubic metres, regardless of if I use a full cubic meter or not. (that's approx 30 cubic feet to you and I)

So anyway, if any of you have parts you want from Australia, shoot me a PM and we'll see if we can't put things together to get them over here or not. The container will be leaving Brisbane, and will be arriving in Chicago.

I also have a source for parts in AU (diesels, H55Fs, full float axles, sliding rear windows, other types of stuff you can't get here easily) so if there's something on your wishlist, let me know.

Fred
 
Australia container

PM sent
 
rec'd a lot of response from this. I'll compile a list, see what's available over there and let you all know.

at this rate, I might be filling half a container, so keep it coming. :)


Fred
 
would love to hear some details on how this container renting thing works, the logistics etc...
 
e9999 said:
would love to hear some details on how this container renting thing works, the logistics etc...

\Basically call the shipping company. They usually charge container space by the cubic meter. Usually gets cheaper the more space you buy.

From Australia to Chicago (the terminal closest to me) it goes from Oz to Los Angeles, clears sustoms there, then rides from LA to chicago on truck or rail.

Generally, you have to wait till a container is full before it leaves it's origin point.

The more I can fill the container, the sooner my "private stash" of cruiser goodies will get here, and the cheaper the shipping will be for all of us.

Fred
 
Can PM this if need be:

I am seriously interested in a 40 FF rear, a spare pair of FF axle shafts, and most likely a new OEM bearing set. Diff's aren't important, but if it comes complete would want 4.10. I'm willing to pay a fair price, but just can't afford what they go for here in the states.

Interested in total price and general summary of condition from your suppliers - I'm guessing that I'm not the only one asking for this and perhaps a post might help to clear the air as to how much info. you've got time to dig up.

My Pop is plowing in northern Mich. until perhaps late March (give or take) and if it got here by then I could arrange a ride home - after that and I'm guessing this starts getting complicated.

Thanks in advance - very kool of you to extend the offer.
 
I'm getting lots of requests for FF axles and aux fuel tanks.

I'm going to see what he has out there, the prices, then I'll post them here, and first come, first serve.

I've gotten much more response from this than I have anticipated, and I'll have to talk to my friend in Aus. to see what he can put together and the costs.

It's 7:30 am there now and he's probably checking his email for the first time and he's probably going to be overwhelmed by the amount of requests.... He specializes in parting out cruisers as a part time business, but this is a lot of parts.

But I'll see what I can do. If this works out well for all the parties involved, he and I are talking about making this a several times a year venture...

SO keep the requests coming. :)

Fred
 
OK, for all of you with parts requests who have PM'd me or emailed me.



The good news:


For those of you who are looking for H55Fs: I have two of them. I'm wiating to hear back from the seller on condition, and what he wants for them. Soon as I know anything, I will officially post them "for Sale." 50% deposit, balance upon delivery.

Sliding rear windows for the 60: I have two pair. I will get photos and pricing information. Then, if the price looks good, I will post them for sale. Same terms as the H55Fs, 50% deposit, rest on delivery.

More H55Fs will be available in the future. He never seems to have problems finding them over there.

The "I don't know yet news:"

For the half-dozen or so who want Aux Fuel tanks for the 80: My friend over there primarily deals in older stuff. This does not mena he can't get 80 parts, only that he probably does not have any kicking around right at the moment. I have asked him to look into it, and I'll let you know what he finds.

The several of you who want H41s: I will let you know what we come up with. SORs price is not terrible on these units (IMHO anyway) so I'll have to see what they will cost me from over there.


Full Floaters:
Looking to see what's available. he has several axles on site, is Emailing me photos. I'll have to determine whether I can get them for you cheaper than the $450 SOR wants.



The Bad News:


4Runner/Surf/Hilux parts. Sorry, right now I'm just sticking to cruisers in order to keep things simple. Perhaps in the future, if I decide to do another shipment again, I might broaden my horizons a bit, but for now, I'm sticking to what I know, and to what I have contacts with.


The "I have to think about it" news:



Sharing the Container for shipping a whole truck: THis is a possibility. Depending on how much stuff I wind up shipping over here myself, and whether or not anyone else on here wants to buy something, we could possibly ship your troopie over and divide shipping costs, which will lower prices for everyone involved. I"ll have to think about that.... Of course, you'll have to get your troopie from whereever it is in Australia to Brisbane.


Where we stand:


That's all for now. I'll post again as I know more info. I might have the H55fs and the FF axles "officially" for sale as soon as tonight or tomorrow morning, so check back often.



Fred
 
would it make sense to try and import new stuff like ARB, OME etc?
 
e9999 said:
would it make sense to try and import new stuff like ARB, OME etc?


I doubt it. Their retail is probably about the same I'd guess. Not sure though.

Probably more used ARB stuff there, but new I'm not sure if there'd be any advantage.

Fred
 
Kool :D

Consider me in line for a FF if you can work similar quality for less than the $450 SOR gets - as stated before, with or without diffs. but preferably something in the newer end of the spectrum.
 
So, this would end up in WI and then shipped back around elsewhere from there?
 
e9999 said:
So, this would end up in WI and then shipped back around elsewhere from there?


Yup.

If I shipped direct to everyone from Australia, it would be more expensive.

For instance, X cubic metres costs me, say 500 dollars, from Brisbane to Chicago.... No matter how much or how little I put in that space. So if I can get 10 items in that space, then it's $50 for each item.

But, if my parts come to Wisconsin, someone else's parts go to Colorado, soemone eles'e go to Virginia.... THen there's no point of containerizing... We'd all wind up renting our own container space, and paying $500 for shipping our individual items. What I'm trying to do is to get as much stuff to one central location at the lowest cost possible, by using one space as efficiently as possible.

Once it's in Wisconsin, you'll have to arrange shipping or pickup. Make sure you factor that in if you decide to get someting. Basically, all I'm trying to do is get as much stuff in country with the lowest cost for freight on the Australia-US leg of the trip.

Fred
 
Last edited:
I'll have more news shortly.

Looks good on the windows, axles, and I might have one spare 3B diesel with H55F trans...

Not looking so good for 80 series aux fuel tanks for this run, but maybe the next one.



Fred
 
Please keep me posted. ASAP as wife is having #2 tommorow and I wont be on here for a few days. (I sent you a few PM's about items I am interested in.
 
sisukid1975 said:
I'll have more news shortly.

Looks good on the windows, axles, and I might have one spare 3B diesel with H55F trans...

Not looking so good for 80 series aux fuel tanks for this run, but maybe the next one.



Fred

fred

you are over your PM quota :D

i'm interested in spare shafts for a 60 series full float. would you be willing to ups.fedex whatver them to me in CA once the container arrives?

thanks
-bryan
 
Status
Not open for further replies.
Back
Top Bottom