Who is running new IMPROVED MAF sensor?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

So is there some sort of notification list? I just don't have the time to check the forums as much as I'd like anymore...

:beer:

Tell Rick you want one (you'll probably need to be ready to pay too), and I imagine when he's got enough preorders, he'll have another batch run. He's said before, he doesn't have the cash to fork out for a batch without having them presold. So divy up and he will tell you when they're in.

That's my understanding.

:beer:
Rookie2
 
I'm curious if this has helped those with the intermittent idle-stumble or the off idle-pinging.

NG, as another data point, it has completely eliminated my intermittent idle-stumble - and I'll describe what mine was to see if it is the same thing that you're talking about - a stumble of about 85 rpms (measured) out of approx 650 at idle, it would occur about once every fifteen to thirty seconds, a short shudder and then back to the norm - that is now completely eliminated after the MAF install.

However, as I reported in the other thread, the idle seems to actually be a bit MORE lopey now - it is not smooth and it is not rough either it is a strange sort of deliberate thump with each and every cylinder firing rhythmically but, lopey and lazy. Think of a sweet little short block as it impatiently waits for some throttle, not something that is over-bored or over-cammed or over-carbed, not like that, just a good ole 350 when well tuned and well exhausted, impatient engines at idle and simply cannot wait to get going is the way I would describe that lopey lazy feeling. Now its still a straight six so there is none of that terrific V8 sound but the feeling is so reminiscent some of my old rides. Dont really know if that is "good" or "bad" but that is the way I would describe it.

Perhaps the most important thing to say about the idle is not really what happens when at idle, but, what happens RIGHT after that; I think that we have all had to an extent that little hesitation right after idle - my rig had it to a less noticeable level but my father's rigs have all had it to an annoyingly noticeable level. That little hesitation COMPLETELY went away after the modded MAF. The other thing that I noticed is that the shifts are sharper. I'm sure someone out there will want to scream BS at the top of their lungs and in fact I was so weary about even asking Rick about this feeling I felt but the shifts seem so much "sharper" for lack of any other way to say it. I still think that sounds ridiculous but despite my deliberate skepticism on this specific point, I think I've convinced myself that it is real. But back to the beginning, that hesitation right after idle, just like the stumble at idle are both completely gone after the MAF mod. Hope that helps. :cheers:

Edit: I never had the off idle-pinging so I cannot report on that one. Put some BG44K through the system perhaps to help that.
 
I would describe the idling as even and consistent but course. You can feel each cylinder fire but it's completely constant.

As for the shifting you need to realize that modern systems use the MAF sensor in the same way that older systems use a vacuum modulator. Especially with a boosted truck, when the MAF gets saturated the ECM looses track of how to modulate the shifting. But even in my stock truck I noticed better crisper shifting.

I picked up another 4 housings today, which were all sold, and they were problem free. So now the drawings are complete and accurate. There is some testing going on on Friday and once I get news of how that goes I'll decide where I'm goijng from here.

It is my biggest concern that people get what the expect from this mod. It does do a lot for helping out the engine with idling and performance but you need to realize that it's a 3 ton truck and even if my calculation are correct at getting 18.5 hp out of it, it is still a 3 ton truck.
 
Landtank met me in a parking lot yesterday
(it was like a MUD geek drug deal :D) and graciously installed
his own MAF sensor in my truck, to get some more feedback.
I specifically was interested in the off idle pinging, as I don't have the stumble.

I drove around a lot yesterday in mixed situations, idling in traffic, highway,
backroads, etc. My truck is stock, 160,000 miles with 285's on it.

So far, I've noticed a smoother idle, but it hasn't seemed to help the off idle ping.
(Rick didn't claim it would, it was more curiousity)

It seems to have a bit more pep in the lower range, but it seems
like it holds each gear a bit longer, almost like OD is off. The shift
points seem a bit smoother as well.

I'll post more findings as I find them.

Thanks again Rick!!


Just to add to my comments.
I ran the new MAF sensor for about 3 weeks and then
Rick swapped back my old one on Saturday.

Now I really miss it!!!...nothing like a back to back comparison :D

Idle was buttery smooth
Shifting was crisp and it seemed to have a bit more juice in the lower end.
I also noticed about a 1mpg increase with 5 tankfuls of mostly around town driving.

Thanks again Rick :cheers:
 
Not sure which one to post to so:

3 Weeks running and still lovin it.

I installed landtanks MAF and I can tell you without a doubt this mod has improved my performance both off the line and heading into the steeps of Colorado.

Off the line you hear and feel the S/C kick in at lower RPM's due to getting more air?
In the mountains, however, is where I really feel it. It maintains its RPM's with more consistency. IE able to go longer stretches of "UPHILL" without any noticed loss of power.
I have been watching my gas mileage and it has improved but I don't have a real good sense of how much. I would say def 1mpg but it may be more. I have not regeared or adjusted for the larger tires lift et al.

I don't have a way of measuring air flow or any of the nice toys that some have that have reported but I would BET this would come out to something nice on the dyno. Not sure how much BHP I am getting but it is def increased. See Signature for my details.
 
Back
Top Bottom