Electronic Brake Controller

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 1, 2006
Threads
32
Messages
117
It's been 2 weeks now since I got my 97 LX450 I continue to wonder what this unit inside the center console does. The dealearship where I got the truck from don't know what it is either. It's labelled "PILOT ACCU POWER". I've checked the owners manual but don't seem to see this unit. I tried searching in the internet & I came across with this aftermarket electronic brake controller similar to what I have inside the truck. Don't know how this works & if I need it to be in the truck. Any ideas.
 
Sounds like it's a brake controller for a trailer.

When you say it's similar to one you have in the truck, do you mean you have another brake controller in the truck? I guess the other obvious questions is whether you have a trailer hitch too?
 
Scamper,

When I bought the truck 2 weeks ago I noticed this unit inside the center console & don't know what it is. The small dealership don't know what it is either. When I bought the truck it didn't come with trailer hitch unless it was removed. So how does this work? & if this for trailer controller then I don't have a use for it.
 
Well I have no idea what it is, but if it's really a brake controller, you'll find a wire going from it to your brake switch (at the back of the brake pedal), a wire going to your positive battery terminal, and a wire going to the trailer brakes (as well as a couple others). Problem is, if you don't have a hitch, then I imagine these wires would just be dangling since there's no place for them to go...:idea:

I tried searching in the internet & I came across with this aftermarket electronic brake controller similar to what I have inside the truck.
Still not sure what you mean by this statement--sounds like you have yet another brake controller in the truck?
 
Is this it?: http://www.not-just-parts.com/product.asp?pid=6163

968373.jpg


If so it's a Tekonsha AccuPower AKA Digi-Trac Pilot.

When you remove it, you had better make sure that the heavy gage wire at the battery is safely disconnected or cut away and secured - it's a high amperage circuit and you do not want it flopping around while powered (don't just disconnect it at the controller and cap it).

I'm curious about why it is installed if there is no receiver. The tow rating for the stock LX450 is ZERO pounds - they do not want you pulling anything due to the spaghetti thin springs, I think. If you crawl under the truck you should be able to see if a receiver was there at one time.

Better yet, keep the controller and install heavier springs and a receiver ;)

John Davies
Spokane WA USA
 
Is this it?: http://www.not-just-parts.com/product.asp?pid=6163

968373.jpg


If so it's a Tekonsha AccuPower AKA Digi-Trac Pilot.

When you remove it, you had better make sure that the heavy gage wire at the battery is safely disconnected or cut away and secured - it's a high amperage circuit and you do not want it flopping around while powered (don't just disconnect it at the controller and cap it).

I'm curious about why it is installed if there is no receiver. The tow rating for the stock LX450 is ZERO pounds - they do not want you pulling anything due to the spaghetti thin springs, I think. If you crawl under the truck you should be able to see if a receiver was there at one time.

Better yet, keep the controller and install heavier springs and a receiver ;)

John Davies
Spokane WA USA
The LX450 tow rating is 5k lbs, per the owners manual, 3.5k w/out towing package, though they all have the towing package. The receiver hitch was optional.

You might have a clue that a receiver hitch was removed, if you do not have any rear tow hooks. They use the same mounting holes, and sometimes they do not get replaced.
 
John,

It's exactly the same in what I have inside the truck. I've checked the back of the truck closely today & I noted wirings for trailer connections. Also, found 4 large bolts on the frame & it appears that the truck has hitch before & was removed. Maybe the PO realized lx450 has no tow rating as you've mentioned removed it. It doesn't bother right now so I'll keep it in there for now as long as it doesn't interfer with the truck.
 
John,

It's exactly the same in what I have inside the truck. I've checked the back of the truck closely today & I noted wirings for trailer connections. Also, found 4 large bolts on the frame & it appears that the truck has hitch before & was removed. Maybe the PO realized lx450 has no tow rating as you've mentioned removed it. It doesn't bother right now so I'll keep it in there for now as long as it doesn't interfer with the truck.

More likely the PO decided he'd sell it easier if the buyer thought the truck hadn't been used to tow. Otherwise, I can't imagine why someone would remove a hitch (unless they were using it off road and wanted a better departure angle).

The center console is an odd place to put the brake controller, but if it's a good install job, just leave it there. However, I would check all the wiring at the controller and at the rear of the truck to be sure you have no dangling bits of wire that could cause a nasty short when you brake. If it's hooked up properly, one of the larger wires at the rear will be putting out 12V when you hit the brakes.
 
The LX450 tow rating is 5k lbs, per the owners manual, 3.5k w/out towing package, though they all have the towing package. The receiver hitch was optional.

I'm curious about where you got those specs. The owner's manual in my '96 LX450 specificly states that towing is NOT recommended. It doesn't say a 1000 pound trailer is OK, it says to not tow at ALL. The stock noodly springs are way softer than on the Cruiser, and that is what I think is behind their reasoning -- it would not be safe due to excess body motion.

That is pure crazy IMHO since my new 3600 pound RAV4 is rated to tow 3500 pounds....

I've got HD OME springs on my LX450 and I feel it would be safe with 5000 pounds, though it's too gutless.

John Davies
Spokane WA
 
It is in the 1996 Lexus LX450 Owner's Manual, pg. 155.
Clipboard01.webp
 
Back
Top Bottom