Recent content by wyattf

Looking to buy a A343F transmission pan with the dipstick on the passenger side and the slanted part on the pan to miss the drive shaft. Can’t seem to find any with the slanted bit thanks in advance

Not hard to replace I found them online pretty easy(get the Toyota oem one not the cheap one(cheap didn’t work) Still having this issue I’m checking some other things. It must be sensor related I assume cause when tps is uninstalled it starts great because the engines in limp mode I bought a...

so i have had hard start issues chased everything from seals to fuel leaks to compression everything checks out. i started the truck with the crank sensor unplugged and starts great no issues/engine actually sounds better. tested the sensors resistance 25ohms(coudnt find any numbers to compare...

just wanted to say thanks for the reply's👍

Heheh

Yeah if I go that route I will be removing the head , I might try a catch can because that’s less work lol.

So I just took it for a drive (with the breather vented into the frame) and I was able to see what I think is smoke from my passenger window and definitely coming from the breather…… so i don’t know :/ my partner says I have “Surf OCD” so maybe it’s just me But also doesn’t seem good cause I...

Yeah it’s always had blow by, pretty sure all 2lte do. Not consuming coolant. Everything else seems fine. I was thinking maybe the valve stem seals? I was just mainly concerned about the smoke maybe I’ve never noticed it. I want to sell it and get a car for work but don’t want to sell...

good afternoon guys, this might be the wrong place to post but I’m from nanaimo and hopefully that makes it alright 😂. I’m having an issue with smoke coming from the breather and I am looking for a little bit of advice(video included) I just don’t want to sell it with too many issues (I’ve been...

UPDATE: so i removed the hard lines and cleaned off where the hard line nozzle enters the injector (mine had corrosion and a bit of rust),using 400 grit sandpaper and put it all back together. after two cold starts (this morning and last night) the problem seems to be fixed.

Yeah that makes sense I’ll have a look and see if I can’t figure out what’s going on there

From what I’m seeing it looks correct(sorry for my horrible photo). I’m just referring to photos I’m seeing online of other pumps. I just couldn’t figure out if that downward line is a breather or what

Happy Friday! Just got a few questions for the more knowledgeable people out there 1. Could corrosion on the injector hard lines (where the injector meets the actual hardline nipple thingy) cause air to leak into system ? But not fuel to leak? 2. Should this hardline be open ended. Photo...

Another update installed an extra turbo that I had sitting around, still no luck passing 10 psi. Pressure tested and no leaks. Waiting for an adapter to pressure test right before the sensor to see if the sensor faulty. But any ideas are helpful Thanks