Recent content by WiscoPat

  1. WiscoPat

    Help Needed - 1HD-FT Issue - Oil-Soaked Air Filter

    I think you're absolutely right on that. So, I could theoretically remove the hose going to the airbox and trace it to vent down towards the frame as a temporary solution, in your opinion?
  2. WiscoPat

    Help Needed - 1HD-FT Issue - Oil-Soaked Air Filter

    It was custom mounted by Torfab
  3. WiscoPat

    Help Needed - 1HD-FT Issue - Oil-Soaked Air Filter

    There are also what appear to be some metal shavings.
  4. WiscoPat

    Help Needed - 1HD-FT Issue - Oil-Soaked Air Filter

    Hey All, I'm currently in Anchorage and have a freshly rebuilt 1HD-FT from Torfab last fall, with their air intake and a Gturbo green wheel. I went to change the air filter today and it was soaked in engine oil. There is also excess oil in the engine oil dipstick tube. I've sent a message...
  5. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    After approximately 4,000 miles and lots of winging it, we've arrived in Anchorage! It was certainly an adventure getting here. The Alaskan highway is smooth to a point, but right after Whitehorse to just before Anchorage, it's a beast. My suspension has certainly been tested. With the Yukon...
  6. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    Positive update - I had the great fortune of meeting Steve, the owner of Overland Cruisers in Belgrade MT, at the suggestion of Torfab. I was able to get the 80 to him for his opinion and help. If he couldn't assist, I would ship it to Torfab. What was discovered were a combination of little...
  7. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    The IP wasn't able to pull fuel on its own. It was ultimately fixed and a lift pump was installed as a precaution/backup.
  8. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    I have some bad news... On day 2 of the journey from Milwaukee to Anchorage, AK, I experienced engine failure. While cruising west in North Dakota, I noticed a brake issue early in the day. Then, there was some low-end vibration in the driveline in first gear - tires and ujoints checked out...
  9. WiscoPat

    Build Ikarus' HDJ81 Aussie-Style Build

    Excited for your progress dude, and to see another solid color desert dune 80 in the mix!
  10. WiscoPat

    Your thoughts on buying a 80 series in 2025

    I absolutely adore my 80 series, as do many on this forum - it's taught me a lot over the lasy 4 years of ownership. Though, it's indeed a labor of love. There is a good amount of OEM and aftermarket support still. If you want to do things "right" and go through a full mechanical refresh of...
  11. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    First time wiring up power to a 12v fridge/generator and it was a fun process. My setup combines a few things. First, I installed some gull wing rear window replacements from Explore Glazing in the Netherlands. High quality kit and no drilling required. Also, precisely zero rust along the...
  12. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    Simple but cool mod today. Since I'm not using the rear seats anymore, I wanted to somehow take advantage of the 14mm seat belt bolt in the C pillar. The supplied bracket/mount and fire extinguisher from H3R are a perfect fit. The mount has holes that need to be drilled out to accomodate the...
  13. WiscoPat

    Build Ikarus' HDJ81 Aussie-Style Build

    I'm in a similar boat with seats. Being 6'2" the current seats aren't great, but adding some seat jackers to help. Seriously, Scheelmann seats are absurd now. If you keep your seats, I really like my seat covers from Escape Gear. Easy install and they look better than OEM, in my opinion.
  14. WiscoPat

    Build Tokyo to Wisconsin - JDM HDJ81 Build Thread

    As I'm prepping for Alaska, I want organized storage. Everything should have a home and be secure. Two brands I've really liked are Kelmatt, an Aussie company, and Adventure Trail Gear, a Canadian company, making a whole bunch of vinyl products. High quality and the USD exchange rate is...
Back
Top Bottom