Recent content by TSJ

I could use a full ABS set in Texas

@LS1FJ40, what did you use to paint the window trim? I need to do this soon.

I've been working on the oil pan arch seal while I had everything apart for the front engine seals. Two things have come up. First I saw this dangling ground for the wiring harness, does anyone know where it attaches? This a 1994 model if it matters. Also I stripped the holes on two of the...

Thanks Onur for taking my call last week and going over other items I didn't know about for the upper pan arch re-seal. How did you know I collected koozies? And a quality one at that. Thanks for putting up with a noob!

Just to update, I built a power bleeder based on Firedog's instructions. Hooking it up to the system I was able the bleed the LSPV and both front calipers. I went ahead bled the system a second time. Then the test, I got in the cab and the pedal is firm! I feel like it's a bit rear biased...

Is there a bleeder for the abs module?

I get that. We did the typical 2 person pump and open/close the caliper bleeders. It worked fine for the two rear calipers. Mainly air for lspv, and nothing but air for the front calipers.

Strangely enough I don't think the master ran out. The lines and calipers definitely cleared out, but there was still fluid in the MC. Yes even with system closed I don't have any pressure build up and MC level doesn't change. This morning I cracked each of the top abs module lines and...

Background: 1994 with ABS and rear discs. 280k on the odometer. I just wrapped up rebuilding the front and rear axles. I have replaced all the calipers with new Napa remans and new factory toyota rubber lines. I believe the area where I screwed myself was leaving the old lines attached when I...

Any plans for narrow wings on flareless cruisers? I love your attention to detail!

I probably did some hand finishing work on it, but not the final assembly. Those duo-tones add an extra pucker factor in final assembly. Good luck on your cruiser!

Sorry to get off topic, but when did you order/ receive your Infinty? I used to work there.

51, thanks!

1. 1994 FZJ, factory lockers 2. Trevor 3. Cruiser or truck 4. 278k 5. Mystery lift springs with iron man struts, head gasket was replaced by previous owner, other than that it's stock 6. Currently the weekend toy/ tow truck for the 240sx. After some PM and tires it will be time to do some...

Bought a triple locked cruiser back in august and went through replaced CDL switch and 4 lo switch on the T/C and the system still didnt work. Last Saturday I was driving it after all the rain came in from Mexico and decided to put it in 4 lo for the hell of since my street is torn up due to...