Recent content by timcsiegel

Hi All, I need some advice. I just purchased a 1965 FJ40 and it has water in the engine.. I am guessing a blown head gasket or a cracked block. I would prefer to stay with the 1F. Is it worth seeing if it can be rebuilt if it is not damaged beyond repair or should I just go straight to...

Hi all, I just purchased a 1965 FJ40 and I can't find a reference for the belt size. The local auto store says 43 inches without AC and 41 inches with AC but I don't really trust them. I'm sure there is someone in this group that knows exactly. Please help. Best regards, Tim

Hi - yes I would be glad to send you some stickers. Somehow I missed your email (timcsiegel@gmail.com). That is also my paypal. I have been sending about 8 to 10 stickers for $5. I send them first class mail. Best regards, Tim

LRA provides a kit that addresses all the fitting issues. In my case, the problem was the hole pattern was rotated 90 degrees when the LRA tank was fabricated. LRA and Cruiser Brothers worked very hard to address this and even do the fix themselves and pay for shipping.

Ok - so I resolved the issue. The plate welded into the tank was rotated about 90 degrees from where it needed to be to coincide with the fuel pump housing. I was able to use a smaller rotation of about 5 degrees to fit 6 of the 7 hole locations. It did require slight bending of the fuel...

That is a good idea and one that my buddies and I have considered. The truck is on the rack at Toyota and I really need to have a solution that gets it out of there soon.

I could use some help. I purchased a LRA tank for my FJ62. The holes in the LRA tank do not match the Toyota factory fuel pump mount. Has anyone else had this problem? LRA is recommending that I drill more holes in the mount to match their tank. I'm wondering why the holes were drilled in...

Wow - they look great and i would greatly desire them for my restoration if I had not already bought some. I would probably either sell them or just keep them on the shelf for later. I probably wouldn't put them on a daily driver - especially if you are in hard conditions.

Guys, I printed the artwork onto vinyl stickers to the same size and look as the original. I have been selling them for $5 for about 6 to 8 of them including shipping. Let me add that I took this picture with my phone and the sticker looks better in real life (perhaps with my poor vision). I...

The front mud flaps (ignore the ad it is wrong) should be available at...