Recent content by talibraza101

  1. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    To conclude this thread, I installed an overflow tank and retightened all radiator hoses. Looks like the system just needed to be at a sweet spot of coolant quantity to stop it from purging after every drive. Thank you all for your help!
  2. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    Thanks for your help, here are the temperature stats for my coolant, should be good I think? https://www.amazon.com/clp/B0033QQ4S0?tag=ihco-20
  3. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    Thank you guys for your guidance as always. I reseated the radiator hoses. They were a bit loose. Im gonna look into coolant reservoir ASAP. As for the engine number, it reads “F 359747” Thanks
  4. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    Yeah it seems like there are leaks particularly in this area of green Zerex Coolant. I think you’re right on either the hose or inlet being bad. This is a ‘71 South American 40 that has most of its parts from what seems like a ‘68 40. This is a F engine. Below is another photo of the filter...
  5. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    Also noticing a tiny leak near the hose:
  6. talibraza101

    Antifreeze Overflow Leak

    Any luck on this? Thanks
  7. talibraza101

    Advice Needed! Coolant Leak on 1971 FJ40 after short drive

    Hello everyone, Upon delivery, I flushed my South American FJ40 of old coolant and refilled it with Green Zerex Coolant(Zerex™ Original Green - Valvoline™ Global - https://www.valvolineglobal.com/en/zerex-original-green-antifreeze/). The cruiser has sat idle for several months as I rebuilt its...
  8. talibraza101

    Brakes: Advice on Trail-Gear FJ40 Knuckle Swap Kit for Disc Brake Swap + Drum Brake Help

    Update: I had a very slow weep happening at one of the unions on the rear brake line. My CruiserCorps' pre-bent brake line kit included fittings that simply did not engage any union I tried. I cut the lines, installed new and more deeply threaded fittings, and fixed the leak. Significantly less...
  9. talibraza101

    Knuckle Rebuild and Drum Brake Overhaul

    Hello everyone. I'd like to follow-up on this thread and provide anyone who might come through here again some details regarding my progress. Knuckle Seal Rebuild: Very straightforward and was genuinely easy to do as a beginner/first-time project. I have never done much work on cars before but...
  10. talibraza101

    Advice Needed on Purchase: FJ62 Donor Front Axles

    That is insanely clean!!!!!!! Thanks for sharing
  11. talibraza101

    Advice Needed on Purchase: FJ62 Donor Front Axles

    Thanks so much for your responses guys! Given my pretty beginner experience, I think I oughta pass on this one and look for 9/75-1/79 4x/5x axles to make the swap easiest for me. This listing happened to be pretty local to me so I thought I’d consider it. Appreciate your offer @Jdc1 ! I will...
  12. talibraza101

    Advice Needed on Purchase: FJ62 Donor Front Axles

    There is a bronze bushing exclusively on the ball and claw axles though—whereas birfield axles come with rubber seals instead. Wouldn’t this prevent me from swapping to the long inner axles + birfields of the FJ62?
  13. talibraza101

    Advice Needed on Purchase: FJ62 Donor Front Axles

    Yeah exactly, I’ve got ball and claw so I guess it rules out a pure knuckle-only swap? I’ve read a bit about the swap and it seems like theres quite a bit of work involved, but doable. Do you think only buying the FJ62 front end is a better idea? Or how about @Jdc1 ’s approach? I figured this...
  14. talibraza101

    Advice Needed on Purchase: FJ62 Donor Front Axles

    Hello guys, Came across this set of 1988 FJ62 Axles (4:11) for sale nearby! I currently have a bone stock 1971 FJ40 with drums all around. What are y’all’s thoughts on purchasing this set? I would like to have 4-wheel discs at some point in the future. Would this be a good starting point? I...
  15. talibraza101

    Brakes: Advice on Trail-Gear FJ40 Knuckle Swap Kit for Disc Brake Swap + Drum Brake Help

    Thanks again for the responses y'all. I just bled another half gallon through. I realize the bubbles I was seeing was just a bit of air being trapped at the quickbleeder screw, due to the fact that I wasn’t keeping the end of the clear tubing from the quickbleeder submerged in brake fluid while...
Back
Top Bottom