Recent content by Streched 75

Custom aluminum air filter box in process of being fabricated then 4 inch stainless steel snorkel. Pics to come

Yes intercooler installed bigger than standard. I will say **** it go's well

A 2003 100 series wagon

Hi John I did think about rebuilding the 1hz. Till I found out I had a possible cracked vein in the block as I ended up with oil in my radiator. Thought was head gasket or head but gasket looked good and from further research lead me to the crack in the block.. if I was to rebuild I would've...

Well hi all been awhile but progress has been made wiring loom conversion back and plug straight in then hit the key. Fire away it did. So plumbed everything else up and nearly back on the road.. ended up keeping original dash cluster.

Well both wiring looms are being sent off to sideshow performance wiring to have them converted. Once get them back just got to lay it in and plug it up. Down side is he's flat out 2 to 3 month wait for it. So in mean time intercooler, piping, pyro gauge, boost gauge has been bought off eBay so...

In process of putting a 2003 1hd fte out of 100 series in to a 92 hzj75 running a 1hz. full conversion ,wiring loom ,dash cluster, accelerator pedal and engine of course.

Where did you plumb in the vaccum hose for the brakes. And great job done. I'm up to the wiring side of it now.. did you pull your old loom out. And if possible may we trade mobile numbers for any questions. Love ya work.

Yes the Hz bell housing bolted straight up no problems all measures out the same. And yes keeping the spare bellhousing flywheel and clutch so can be put back on when upgrade gearbox and transfer case.

No did not need to move mounts on frame

Phase one complete.. its in all bolted up

Engine conversion 1hz to 1hd fte

I'm day 3 into engine conversion from a 1hz to a 1hd fte

Close fit will come away a bit when let it down on mounts

Well engine and wiring loom all the way out and 1hd fte nearly in. Due to using 1hz box had to swap flywheel clutch and bell housing over. Will upgrade box later just want to get the conversion done first. Also had to use 1hz engine mounts. What was once lots of room in engine bay now is tight...