Recent content by SnoFJ

There’s numerous factors over the years. First my regulator went out, replaced it, adjusted it wrong. The tabs on the rail that hold the window got bent (metal softened up). Happened again and I made a bracket to stiffen it up. But the nail in the coffin was negative temps plus condensation and...

Could the door automatically unlocking be because of this cut green wire?

Now my driver door automatically unlocks when I lock it

Thanks guys. I was actually able to get the door to open. Don’t ask me how, I feel like I did the same thing time and time before, I just pulled on the inner door handle while messing around and it popped open. Basically just pulled all the way over on the door latch rod, pushed down on the door...

So it was tight, I removed the kick panel in order to get the control switches and aftermarket speaker out. I’ve got all the screws and stuff out, I just can’t figure out how to pop the clips around the edge in order to pull the panel up. Once I get that figured out, I’m home free essentially...

I was thinking about taking the passenger side apart to get a better visual. After talking to a local shop a few minutes ago, it sounds like I was on the right track as far as what rod to mess with, seem like it’s more of a matter of just getting the right pressure/angle. I’m probably gonna go...

Tried using the key in the door, nothing. It does look like the window came off track and somehow damaged stuff. Looking down where the window comes up from im pretty sure the plastic arm that holds the rod on the outer door handle is broken Welp, time to start taking the seat out I guess...

Can you remove the panel with the door shut? The edges that need to be pryed are blocked by body/interior trim. Not to mention the speaker is 1/3 blocked by the dash and I can’t remove the speaker cover to get to the actual screws

I’m currently getting in and out through the passenger side and my window rail is bent so the window won’t roll up completely.

So today I was in -10 to +5 Fahrenheit temps. I went to roll down my window but it wasn’t working. Come to find out, condensation froze my window to the door. I heard a couple loud “pop”s and my window came out of the rail and the regulator busted some plastic pieces inside. I can’t get my door...

850/863 on 285's. White knuckle sliders and IPOR skid plate.

It could lead to discipline potentially, there's a few people on here that work for the same place, as well as customers can reference my statement. It's a bit of a long shot but plenty of people have been disciplined for stuff said over the internet in the past, and I've learned over time to...

You still have to make contact with the customer. The customer doesn't actually physically hold the electronic board in their hand and sign, but the employee still has to make contact with the customer and then do the signing from there. But everyone is grossly overworked and some employees...

Also, I've had the common u-joint issues. I took the front shaft to get balanced and the shop said the joints were bad and replaced them with Spicer's without my consent. I would have used OEM. But regardless that was probably about 2-3 years ago

Last night I noticed a faint clicking sound as I slowed down to pull in my driveway. The noise was while going straight, not turning. I got the front in the air and turned the wheels, but it was hard to pinpoint where it was coming from because it didn't take long for the wheels to stop moving...