Recent content by Shiggy

  1. Shiggy

    Ignition barrel rod modification (‘00 LX470)

    Taking a look after some sleep, the second notch from the tab thing needs the underside knocked out and then the block at the end needs to be brought down a smidge closer to flush
  2. Shiggy

    Ignition barrel rod modification (‘00 LX470)

    Lots of ignition barrel rods breaking on the 100 series, on a lot of threads I’ve read I’ve seen it’s best to either use 7853A (my question is about 7853B) or to buy and replace the entire assembly 45280-60510. I bought the assembly but can’t find any videos on how to replace it, or anything in...
  3. Shiggy

    Ignition barrel rod stuck in the cylinder, what am I missing?

    Been working at replacing my ignition barrel rod (part 7853A is the correct one, using a 7853B that I’ll end up modifying to work). Got everything done fairly smoothly up to the point where I’m trying to remove the back half of my snapped ignition barrel rod. Got the white plastic piece that’s...
  4. Shiggy

    Yet another broken ignition…how to best diagnose?

    Good callout, that one hadn’t popped up for me yet. The first common failure I’d seen called out was actually that steering column assembly they’re talking about in the thread. I guess for now I need to just pop off the panel under my steering wheel and look around when I get back home. Just...
  5. Shiggy

    Yet another broken ignition…how to best diagnose?

    Edit: just realized I somehow auto corrected from ignition to transmission lol Transmission was locked. Popped the cap on the override button or whatever so I could get it in neutral for the tow (which locked the steering wheel…yay). But yeah, transmission was locked since I couldn’t get...
  6. Shiggy

    Yet another broken ignition…how to best diagnose?

    Was on my way to work in the ‘01 LX470, stopped for some starbs because I just had to have my pumpkin spice, and when I got back in I inserted my key, turned it, and felt a pop. Now the key turns freely inside the ignition cylinder. I feel catches kind of inbetween lock and acc, and then the...
  7. Shiggy

    Need help with my front diff oil seals

    Sounds good! Thanks for the help. Got it pulled and cleaned up the mating surface a bit more. Looking over the seal and the only (thankfully minor! marks on it are from trying to get it tapped in. Cleaned it up again with a shop towel wetted with some gear oil so I don’t leave any little things...
  8. Shiggy

    Need help with my front diff oil seals

    That mark is on interior side of the seal, and I think just a bit of oil from my banging around. That said I’ll pull this one out and reclean the area and part before trying again.
  9. Shiggy

    Need help with my front diff oil seals

    Yep. The seal came directly out of the plastic bag, got lightly greased (per the chowcare video I watched) and as for the diff side same thing where I lightly wiped it off before installing
  10. Shiggy

    Need help with my front diff oil seals

    Already have that. Using it still isn’t quite working, I know it should be flush with the housing it sits in but even having used the tool it’s uneven (flush at the top, proud by ~1/8” on the bottom) which I can’t imagine is right
  11. Shiggy

    Need help with my front diff oil seals

    So I’m currently working on a more or less complete front end refresh on my LX. Got my old oil seal out, and started working on getting the new one in. I’m using the “IFS CV axle seal driver Special Service Tool” I got from cruiser patch but I’m still having trouble getting the seal to seat...
  12. Shiggy

    What to look for on new parts before installing?

    Will definitely consider them next time. Getting a new R&P shipped out since that's the most at risk, they claimed it comes to them having leaked a bit which I can understand but it taking impacts straight on the threaded ends just has me skeptical. We'll see if they actually use good foam this...
  13. Shiggy

    What to look for on new parts before installing?

    Yeah that's kind of where i'm at. Just don't want to wait to get this job done, problem is it basically looks fine except for the leak I can't see a definite source for. If they'll let me keep this one I may just send it for now and hold on to a new one just in case. Wish they'd at least thrown...
  14. Shiggy

    Let’s see your white 100 series!

    That was basically my experience too. I do have good tires and brakes thankfully, but my front end is definitely worse for the wear. That said it was rock solid going through that big drop we recently had in some not well managed spots. Hell i even hit some drifts out of work with the boys and...
  15. Shiggy

    What to look for on new parts before installing?

    Recently got my Rack & pinion, front cv axles, lower control arms, and a few other things and with how beat up the boxes were from shipping (CA to CO) I of course had to give them a once over before installing anything. I noticed the steering rack had leaked some kind of lubricant from the end...
Back
Top Bottom