Recent content by sgmartz

Any idea how much shipping would be to 80439?

Still have these?

Hi all, I did some research on here and wanted to double check my plan for a headlight upgrade. My goals are simply better driving light for street (I have aftermarket lights) and better beam spread. Slee 9005/9006 wiring harness upgrade - based on several thread recommendations on here (SLEE -...

Is the little 3” speaker under the steering column for dot cones and whatnot? Or OSS it a tweeter?

Do you have interior parts? trim, dash, etc - if so what color?

hahaha fair I should have said, verify its locked without taking it off the trans lift

Thx. Yeah i I was trying to figure out his to lock it by hand - which way does it move?

Also curious, does anyone know which way to orient the can gear that engages the CDL within the transfer case? I posted in a separate thread but long story short, it’s locked in H and L but shows no light (all diagnostics point at the actuator being bad). So to put it back in, does anyone have...

Thx, exactly the info I needed. Anyone have thoughts on the appropriate grease?

With red circle

Hi all, I’m refurbishing a used CDL actuator I bought. Couple quick questions. See picture, should these little metal “blocks” at the base of the winding be soldered in? Secondly for the worm gear, it’s pretty dry, is a white lithium grease the right grease?

It’s a great point. Sometimes you have to differentiate a FSM suggestion and apply your own logic. In the case of a valve cover where it’s 1) not structural 2) doesn’t hold any dynamic loading 3) redundant (10+ bolts) 4) etc. Not judging, I prob would have done the same as you. I bet the torque...

Thank you! That helps validate my conclusion but with more specifics. Coincidentally there’s a t case for sale very close to me for not much. Might just pick up the whole thing for spares.

Thanks all super helpful. I ordered that switch. Just checking my logic. The switch replacement will ensure the dash light comes on. However, my actuator still did not function with 9v applied so I need a new actuator or I could try to remove and rebuild mine. Agree?

That would be amazing!!