Recent content by seeylater

  1. seeylater

    HELP - Stranded, won't start

    UPDATE: My brother is an idiot, it was just a dead battery. Once I had it towed back home, I put a jump pack on it and it fired right up. However, as I was driving it around I noticed the voltage was dropping to 10.5v at idle and would read about 12v under load. I wasn't sure if that meant an...
  2. seeylater

    HELP - Stranded, won't start

    Thanks for quick replies. I'm just getting it towed right now and will mess with it tonight or tomorrow. Found a $75 tow. There is no alarm, I ripped it out last year and soldered the ignitions wires back together. Shift linkage and neutral safety switch makes sense, I'll check those out first.
  3. seeylater

    HELP - Stranded, won't start

    I let by brother borrow the LC 80 while he's in town so he doesn't have to rent a vehicle. My LC 80 has never once given me any issues to date. He just called me saying he ran into Target to grab something and when he got back in the car, the engine started fine, but the shifter was stuck in...
  4. seeylater

    Road Cruiser 80 Build

    I didn't write down the wire colors coming out of the antenna switch, but just put a meter to it and you'll find the two wires that close contact when UP or DOWN is pressed. Then just use those and solder them into the board of the X50 display where the little menu wheel is. It only took me...
  5. seeylater

    Oil Leak - Is it the oil pump?

    Thanks Cass, that's perfect. Ordering it now...
  6. seeylater

    Oil Leak - Is it the oil pump?

    I recently started having an oil leak that's going thru 1/2 quart of oil per week. It was hard to identify where it's coming from, so I spent about 1 hour this past weekend degreasing the bottom of the car/engine to try and locate the leak. Once the bottom looked nice and clean, I started the...
  7. seeylater

    Road Cruiser 80 Build

    They are small LED lights used on boats. See here: TecNiq | D04 I used a Dremel and very carefully cut out 3 oval holes, then hit the entire grill with some Plastidip. The lights are epoxied in from the back. Search Amazon for "Autool X50 PLUS Multi-Function Car OBD" $35.00 and the LCD fits...
  8. seeylater

    Road Cruiser 80 Build

    This beautiful FJ40 was also in there getting a $30K interior/stereo done: I also got rid of the clock and replaced it with an OBDII gauge that I took apart and soldered the switch to my antenna up/down button that I no longer use (put in a fixed antenna). This allows me to flip to MPG...
  9. seeylater

    Road Cruiser 80 Build

    Summer Update: Somehow I managed to convince the wife to take the 23-year-old, 174K mile car on our 1500 mile road trip with the kids instead of one of our newer cars. I knew I was a dead man if this thing broke down and ruined our 8 day trip across Florida. Luckily, besides having to top off a...
  10. seeylater

    Road Cruiser 80 Build

    Small Update: I installed a Curt hitch which bolts to the rear frame. It was by far the easier and non-problematic thing I've done on the LC. Took probably 30 mins. I can now install my brand new NorthShore NS4 bike rack, which took about an hour to assemble. So far I think I like it, used it...
  11. seeylater

    Road Cruiser 80 Build

    I'm not sure I love it enough for $3500.00. Stop giving me ideas. 🤬 I'm trying to stay on budget here. Besides, this truck is going to my son when he starts driving in 2 years and it needs to be nice and SLOW.
  12. seeylater

    Road Cruiser 80 Build

    I’ll wait until the bumpers, fenders and lift is on and see how I feel about the running boards. I got the grill wired up, front bumper on and for now I put the stock rear on until I find something I like.
  13. seeylater

    Road Cruiser 80 Build

    Memorial Weekend Update: Land Cruiser is back from paint and it looks great. It still needs to get wet sanded and buffed. I attempted to do the rear hatch prior to installing the new badges, but it appears it's going to take longer than I anticipated. I probably should just have paid someone...
  14. seeylater

    Road Cruiser 80 Build

    Just stopped by the body shop to look at the progress:
  15. seeylater

    Road Cruiser 80 Build

    Update: I spent about 8 hours this weekend taking off bumpers, fenders, etc to get it ready to drop off at the paint shop. I'm going to stick with the stock Sage color since doing a color change was going to cost me $6-8K. By doing some of the work myself, the paint is only going to cost about...
Back
Top Bottom