I will ask my friend tomorrow if that is the wire I tried everything I could and could not figure it out so I ended up breaking down and Hauling it to my friend who owns a shop here in Orem Utah called nip and Tuck performance he is an electrical genius when it comes to these type of things and...
yay exciting news four hours of tracking down wires to the wiring harness and finally found one wire rubbing against the motor that had worn through and was shorting out fixed the wire and the Beast fired right up issue solved thank goodness
And track down why the fuel pump still is not kicking on going to be looking into that open circuit relay that was mentioned above and hope that and the new fusible link resolve this issue
I have a new fusible link on its way to the dealership for me to pick up again however it appears as though I'm going to have to track down some type of short possibly happening in the system that is making the link blow for some reason
to update my situation I replaced the fusible link with a brand new one from the Toyota dealership upon replacing it and turning the key to the on position the check engine light was back on my dashboard however the fuel pump still did not kick on and when I try to turn the car over to see if it...
With the exception of testing the fusible links I have tested the EFI relay and it had 73 ohms so I'm assuming it is still good still haven't Tracked Down the open circuit relay though to test it
Thank you everyone all of your input has been a super huge help a lot more than I've been able to track down online and in the Haynes manual every other schematic makes the am2 link look like it's further up there wiring harness and that's why I've been having such a hard time trying to find it...
Awesome thank you very much I am going to check both of those first thing in the morning I had previously tested the EFI main relay and it was showing 73 ohms from previous info I was told 60 to 80 ohms means the relay is still good however at this point it's worth replacing just to see if it...
I was told to check the am2 fusible link however I've not been able to locate it I thought it was coming directly off the positive battery post but that turned out to be the am1 fusible link. ECU doesn't appear to have any burn marks or melted wiring going into it tested all connections I could...
Hoping to find a little help I have a 96landcruiser that shut off all the sudden like it's not getting fuel I have tested all relay ports and fuses including the plug directly into the fuel pump and they all have power relays test between 60 and 80 ohms the car will crank over and try to start...