Recent content by scottaskinosie

  1. S

    2011 Land Cruiser-bad head gasket? Maybe looking for a new engine...

    Thanks @cfsds! According to the notes my FIL sent me, it looks like they did not physically test nor clean the injectors, they "checked the fuel trim and injector pulse data electronically verifying the injectors were firing evenly and the fuel mixture was not too lean or rich". I am not...
  2. S

    2011 Land Cruiser-bad head gasket? Maybe looking for a new engine...

    Thank you @Heckraiser, sorry for the delay. I wrote up a response the other day and forgot to hit send😅 The sent me a video of a bore scope they ran. i could not see fluid but they insist it is there. I do not think it is a very big leak, if any, as I do not see any white smoke and the issue...
  3. S

    2011 Land Cruiser-bad head gasket? Maybe looking for a new engine...

    A couple of shops have said do not replace the head gasket. I’m not having luck finding and engine for this. And opinions on replacing the head gasket?
  4. S

    2011 Land Cruiser-bad head gasket? Maybe looking for a new engine...

    Hey everyone, My father-in-law has been having issues with his 2011 LC. It started as the check engine, trac and 4 lo lights coming on and it running a little rough, but not terrible, from time to time. The code he pulled was for cylinder 8 misfire. He has had it looked at by 3 different shops...
  5. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    Yep! The threads were fine and I was freaking out over nothing:doh: For whatever reason that one fitting is just a little tighter than the other three...
  6. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    Hey everyone, sorry for the delay in getting back with you all on this. I have an update! I bought a bunch of taps and I was getting ready to try to fix this issue myself and then chickened out and brought it to a shop that has been recommended to me here in Austin. They had a look and decided...
  7. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    Thank you @badlander! Makes sense. I was looking and they’re wondering how to handle that😅
  8. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    Thanks as always man! I did not go that far in, I was WAY too nervous. I did clean it up really good with a brush before starting, but still it wasn't wanting to go in. I am going to start doing some research on what you have listed above. I REALLY appreciate the advice!!! I will let you know...
  9. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    I’m afraid even then I’ll have the same problem. I believe the remanufactured MC ruined the flare nut… So new flare nut, reflare the brake line and new MC? What if it goes in and doesn’t leak? Thanks LC.
  10. S

    I may have cross threaded one of my lines into my new booster/master cylinder😩 any advice?

    I just got my new master cylinder assembly for my 01 cruiser (thanks again for the assist @2001LC!) and 3 of the 4 lines went in easy with my fingers. The fourth started okay but wasn’t as easy. I gave it a tiny tap with my wrench and it moved easily so I thought maybe it had a little debris and...
  11. S

    In search of/looking for a reliable 01 master cylinder assembly or maybe advice on a fix?

    Thanks @Brandon Ryder! I did this exact thing even with your warning😩 the Toyota dealership here in Austin told me I needed 0012 but I think you are right, it looks like I need 0042😣
  12. S

    In search of/looking for a reliable 01 master cylinder assembly or maybe advice on a fix?

    Thanks again @2001LC! I have another question when you have a moment. Our Toyota dealership here in Austin told me the part I needed was 47050-60012, so that’s what I ordered from Decatur. ( they did an excellent job by the way! You weren’t kidding!!!) But as it turns out, it’s the wrong part😩...
  13. S

    In search of/looking for a reliable 01 master cylinder assembly or maybe advice on a fix?

    Thank you @2001LC! You save my bacon once again ☺️ That makes a lot of sense. I should have bought a new one last year but the price of a remanufactured one was too appealing 😩 I’ll check this guy out and probably get that👍 they wanted $2,400 here in Austin 😣
Back
Top Bottom