Recent content by SandiegoLC

Thank you everyone for your replies.

I replaced this part before but i can't remember what is called. Why would it be heating up so much? Thank you.

Hello, just checking to see if by chance you may have the front seat belt for a 91 fj80? any color will work. Thank you.

In need of a working condition transfer case. The one in my truck is on it's last leg form a self inflected wound by not checking the oil level:bang: The truck has 297K. Thank you,

Hello, Do you have a transfer case for a 91 fj80 or know someone that might be selling one? Thank you, Paul

replaced both. Started with fusible links, checked wiring, fuses, relays, sensors, and finally replaced the ECU after making sure all else was ok. The ECU was indeed blown.

Thank you deathValleypaul. got the ECU today. She fired right up.

Again, thank you everyone for your input. The cruiser lives on!! It turns out that the ECU was blown. Chased everything down, the only thing i can attribute it to was the fact that the fusible links were almost 30 years old. I think they just failed. I did find that the red and gray wire to...

Yes, the 15 amp efi fuse was blown. Once i put everything back together, the fuse is NOT blowing anymore. I disconnected the AFM as described but still no CEL. I will double check the chafe point at the glove box. Thank you, again for your input.

Hi Jonheld, the blue fusible link was blown. I have been checking to see if it had a bad ground or shorted out wire but i couldn't find anything in the harness. It all appears to be good as far as wiring. I checked the alternator for proper grounding and it all appears good, all the wires...

Also no CEL if i bridge pins 2&4 on the efi relay bay. Thank you!

The engine turns over but it does not run. it was running perfectly before this issue.

I just wanted to make sure i check everything before replacing the ECU. I have +12 on b+ +12 on brass +12 on pin 2 and 3 of relay replaced the fusible links, which were blown Replaced the EFI relay Replaced the fuse checked both O2 sensors and wires-OK i get continuity to pin 3 on the ECU but...

Excellent. I'll paypal you tomorrow. Heading out for some libations right now! Thank you! Happy 4th!