Recent content by orors

In a pinch (I wanted potato chips ) the opening up for the drawers near the end of the LC helped, but we have 6 - 2.5” thick spelling cushions. It’s easy to move the smaller cushions and access the drawers. The cushions were from a 5” thick high density foam couch cushions we use to have. We...

Didn’t even think about an accident! Thanks for the heads up. We will have to figure some thing out. The 1 locking and 1 non locking drawers slides is blowing my mind. Got to return 1 pair and buy a non locking set. The prefinished plywood cause things to slide around very easily. Need...

The box’s are 42” long, and the sleeper pad is just under 30” long for a total of 6’. I had to cut it 5 times to get it to fold back with the roof. My wife is working on a sleeping pad out of some old couch cushions we had. I’ll post some pictures when she gets done. I like that idea thank...

Just 95% finished our Draw box’s / sleeper pad for our 100 series LC. Structure is 3/4 Pre finished maple plywood Drawers 1/2 Pre finished maple plywood The locking drawer slides and piano hinges are off of Amazon. We cut out an access panel on the top of the drawers so we can access them...

Thanks for the answer! I like the 2 hinge design on the sleep fold out. It took 6 cutting tries to keep the length as long as I need and be able to fold over the end over with the all seat belts, roof bumps, and rear cup holders.

Got my drawer box built. I made 2 boxes thinking 1 day May be I’ll reconfigure it. I was planing on using piano hinges for a fold out sleeping platform and the sides by the wheel wells. Does any one have any experience sleeping on the piano hinges and can you feel them through sleeping pads or...

The zap degreaser worked great. After 2 cleanings, I’m 99% sure the Oil leak is fixed. Hopefully the At-205 will solve the steering gear box leak for a while. The rebuild looks a little out of my skill set. The door locks were fairly simple thanks to the video on the forum. Felt pretty...

Thanks for the heads up on the ZAP, I’ll give it a try. I just got some cheap stuff. The oil leak had slowed down a lot after I replace the figure 8 gasket on the oil filter housing, But it’s still leaking from some where.

After cleaning the under side and examining photos and reading posts. I think I found the oil leak coming off a bolt on the oil filter adapter?? Not sure if that’s whats it’s called.

Thanks for the heads up on the actuators, just ordered new motors. The previous owner had the valve cover gaskets replaced at 170 K miles and currently the LC has 250. This weekend I’ll have some time to clean up the mess under the LC from the oils and have a better idea.

Hello, Just bought a new 2001 100 series LC. So far it’s got - 2.5” emu lift Spc upper control arms 33” BFG ARB bumper with a wench A nice list of things the previous owner fixed Good list of other things not fixed: Oil leak on the driver side(owner said he had no idea it was leaking...