Recent content by NVDuckin

Just driving down the highway and my side lamp popped out and shattered when it hit my bumper, has someone else had this happen before? Best place to get a replacement? It looks like a new would just pop right in. .

What fuse do you swap out with this one?

That’s good to know. I’ll pick up an AGM charger. Have you liked the CTEK one?

I have an AGM battery and it looks like I need to up the voltage to charge it, but these guys are out of stock and who knows what their turn around time is with COVID. Anything else on the market that will work? MK3 Mini blade 7.5A

How did you get the hub covers to fit on your front wheels? A spacer of some sort? I have the same wheels and would love to figure that out. Thanks!

Went and bedded the pads last night. Had some squeaking from the driver side after a few minutes of driving. I took it apart again and added some more grease to the pins, I think I was a little stingy with the single use packet included with my brake kit so I bought some more brake grease. Went...

Got it all back together, is it normal to have some play or float in the caliper? I did fully compress the piston before assembling. Sorry if this is a dumb question, but I took a short video of it below:

Got it out with a .22lr bore brush attached to a drill. It was in there good, couldn't dig it out with a pick.

She came free! Been soaking in PB today and I've been working on it with vice grips every couple of hours. I can't tell why it was so hung up as no debris came out with it. Also, the rubber fitting is gone. Is that absolutely necessary? Digging into my gun cleaning kit like hankinid...

Looks like Centric is available if you buy the whole reman caliper, Cardone is the only option they have for just the caliper bracket.

This likes it, $26 seems cheap. The replacement pin is like $15, and I think I can reuse everything else.

Where can I buy this? Does it include the caliper bracket, because that is the part with the stuck pin. I would 100% be interested in that. Yeah when I did the driver side both pins slid out pretty easily. This passenger side one is completely locked up, been working on it off and on this...

How did you get the seized pin out? Mine will spin, but I can not get it move out at all.

So: 1- Remove the pin, 2- Clean out the hole, 3- Re-grease, 4- Hopefully it will fully seat. I swear these jobs never go as planned.

The top one moves freely, I can't get this one on the bottom to move.