I just saw the steam shooting out from down by the passenger side floorboard area, it was coming out so fast I couldn't determine anything more specific. The heater wasn't on when it happened, from what I recall.
The more I read, the more intimidating it seems. Where I'll be working I can't use an engine hoist. If I bought one I'd have nowhere to store it, anyway, my garage is FULL.
How are you supporting, and hoisting, the tranny Via the lumber, I'm curious. I've never done anything this way, this is pretty new to me. The doors can take all that weight?
My biggest question now is whether the transmission is removed Separately from the bell housing/clutch cover as the Haynes manual seems to suggest, or whether they are/can-be removed together. I'll have to cross check that with my FSM, but that seems odd compared to the clutches I've changed in...
Are people actually removing the Gas Tank per the Haynes Manual? Is that step necessary only if hoisting the transmission from above? I don't see this step in the FSM, only the Haynes manual. Seems like overkill, but I don't want to mess this up...
I'm not familiar with where the inspection cover is, I don't see images of it in my manuals. Is this the same as the Flywheel housing cover plate? I do see a picture of that in my Haynes manual, but no specifics on how to remove it. This is all different than the bellhousing arrangement I'm...
How do I open the inspection cover? I'm not familiar with the nuances of the FJ40 clutch and surrounding components. I've changed two clutches in my life, and old Chevette back in High School and the clutch on my 92 Jeep Cherokee a few years back.
This one looks a lot different. The Haynes...
I've got a '74 FJ40 stamped with a February build date, but it has a 4 Speed Transmission. I'm no longer in contact with the guy I bought it from, so I'm not sure if this was a conversion (seems likely, even though it looks stock when I examine it from underneath the truck) or stock.
I'm trying...
Thank you for your reply. I've got to move my Cruiser before I can start working on it. I had parked it on the street when the Clutch decided to go, don't really want to work on it there currently, neighbors already don't like my truck much!
Yes, water on the floor, but none that I noticed until the steam started. I haven't checked my coolant level yet, I did have to soak up a bunch of water from the footboards.
How difficult is it to replace the Heater Core? This one caught me off-guard. I've already got to replace the clutch, and...
I went to start my 1974 FJ40 the other week, running it for a while, and steam suddenly started entering the cabin in copious amounts. There was so much steam that I couldn't pinpoint the source. Am I probably looking at a front Heater Core failure?